Descrizione
LW-25/16 Nitrogen Compressor – High-Pressure Oil-Free N2 Booster for 1.60 MPa Industrial Applications
Engineered to deliver 25 m³/min at 1.60 MPa discharge pressure, the LW-25/16 is a two-stage, two-row oil-free piston nitrogen compressor designed for high-pressure nitrogen injection, pipeline boosting, and demanding petrochemical process applications. Zero lubricant contamination, continuous-duty rated, and built for 24/7 operation at elevated pressure.
Panoramica del prodotto
IL LW-25/16 nitrogen compressor occupies a specialized position within our oil-free piston compressor portfolio, bridging the gap between medium-pressure nitrogen distribution and high-pressure process applications. With a rated capacity of 25 m³/min e un eccezionale 1.60 MPa discharge pressure, this unit addresses the most demanding nitrogen compression requirements in industrial gas infrastructure where both substantial flow and elevated pressure are simultaneously required.
What distinguishes the LW-25/16 from conventional high-pressure alternatives is its meccanismo di compressione completamente senza olio. The piston rings and rider bands are fabricated from advanced self-lubricating PTFE composite materials specifically formulated for high-pressure service. These components operate without any hydrocarbon lubricants, ensuring the nitrogen stream remains completely free of oil contamination even at the elevated temperatures and pressures associated with 1.60 MPa discharge. This intrinsic oil-free characteristic delivers ISO 8573-1 Class 0 certification natively, eliminating the need for costly downstream oil-removal systems that would otherwise be mandatory in high-pressure applications.
Il compressore utilizza un due stadi, due file (二列二级) configuration that is essential for managing the extreme pressure ratio required to achieve 1.60 MPa discharge from near-atmospheric inlet conditions. The staged compression distributes thermal load across two cylinders, with an independent high-efficiency intercooler between stages maintaining gas temperatures within safe operating limits. The robust cast-iron frame and precision-forged crankshaft are engineered to withstand the substantial mechanical forces generated by high-pressure operation, with a rated service life exceeding 100,000 hours secondo i protocolli di manutenzione standard.
Technical Specifications – LW-25/16
| Parametro | Valore | Unità |
|---|---|---|
| Modello | LW-25/16 | – |
| Modello | Due stadi, due file (二列二级) | – |
| Capacità | 25 | m³/min |
| Pressione di scarico | 1.60 | MPa |
| Dimensioni del compressore (L × P × A) | 2500 × 1600 × 2700 | mm |
| Peso | 4.50 | T |
| Energia | 200 | kW |
| Voltaggio | 380 / 6k o 10k | V |
| Gas medio | Azoto (N₂) | – |
| Lubrificazione | Senza olio | – |
* Tutte le specifiche sono valutate in condizioni di riferimento standard (ISO 1217, Allegato C). Le prestazioni effettive possono variare in base all'altitudine del sito, alla temperatura ambiente e alle condizioni di ingresso.
Caratteristiche principali e vantaggi ingegneristici
1. Tecnologia di tenuta in PTFE ad alta pressione senza olio
The LW-25/16 utilizes a proprietary high-pressure self-lubricating piston ring and rider band system manufactured from advanced PTFE composites reinforced with high-strength glass fiber and bronze particulates. This material formulation is specifically engineered for the extreme pressure differentials and elevated temperatures encountered at 1.60 MPa discharge pressure. The rings achieve a coefficient of friction below 0.06 without any external hydrocarbon lubrication, completely eliminating oil contamination risk. For high-pressure nitrogen users in petrochemical, pharmaceutical, and specialty gas applications, this delivers native ISO 8573-1 Class 0 compliance without the complexity, cost, and reliability concerns of downstream oil-filtration systems operating at elevated pressure.
2. Compressione a due stadi per rapporti di pressione estremi
IL architettura di compressione a due stadi is absolutely critical for achieving 1.60 MPa discharge from atmospheric inlet conditions, representing an overall pressure ratio of approximately 16:1. By dividing this extreme ratio between a low-pressure cylinder and a high-pressure cylinder, the LW-25/16 limits the discharge temperature of each stage to below 160°C, preserving the structural integrity of the PTFE sealing elements. A high-efficiency shell-and-tube intercooler between stages removes the substantial heat of compression, with cooling water flow designed to maintain inter-stage temperatures below 45°C even at maximum continuous load. This thermal management extends valve plate life by approximately 50% compared to single-stage designs attempting equivalent pressure ratios.
3. Reinforced Heavy-Duty Frame for High-Pressure Operation
La struttura principale è realizzata in fusione GG30 gray cast iron (upgraded from the GG25 used in lower-pressure models) with thicker wall sections and reinforced bearing pedestals to withstand the substantially higher mechanical loads generated by 1.60 MPa discharge pressure. The disposizione a due file di cilindri contrapposti provides natural first-order force cancellation, reducing unbalanced inertia forces transmitted to the foundation by over 80% compared to single-row designs. This mechanical advantage is particularly important for high-pressure compressors where the peak cylinder forces are significantly elevated. The forged steel crankshaft is dynamically balanced to ISO 1940 G2.5 standards and features enlarged bearing journals to accommodate the higher bearing loads.
4. Flexible Voltage Configuration for Industrial Integration
The LW-25/16 is available with a 200 kW drive motor in three voltage configurations: 380V for facilities with low-voltage distribution infrastructure, or 6kV/10kV for direct integration into medium-voltage industrial networks. The 380V option is ideal for smaller installations or retrofit projects where medium-voltage infrastructure is not available. The 6kV and 10kV options eliminate the need for step-down transformers in large industrial facilities, reducing electrical infrastructure costs and improving overall energy efficiency. All motor configurations conform to IEC 60034-1 efficiency class IE3.
Scenari applicativi
High-Pressure Nitrogen Pipeline Boosting
In industrial gas distribution networks spanning multiple facilities or large plant sites, the LW-25/16 serves as a high-pressure nitrogen booster station to overcome pipeline friction losses and maintain adequate pressure at remote consumption points. Its 1.60 MPa discharge pressure provides sufficient head for distribution over distances exceeding 5 km, making it ideal for centralized nitrogen supply to multiple process units, storage tank farms, and remote loading stations. The 25 m³/min capacity supports medium-scale industrial complexes with multiple simultaneous nitrogen consumers. The oil-free design is critical in pipeline applications because any oil contamination would propagate throughout the entire distribution network, potentially affecting all downstream consumers.
Petrochemical Reactor Inerting & Catalyst Preservation
Petrochemical reactors, catalytic crackers, and hydroprocessing units require high-pressure nitrogen for reactor inerting during startup and shutdown, catalyst bed preservation during standby periods, and emergency depressurization. The LW-25/16 high-pressure nitrogen compressor delivers the 1.60 MPa pressure required to overcome reactor system pressures and inject nitrogen directly into process vessels. The oil-free design is absolutely mandatory in these applications because oil contamination would poison expensive catalyst beds, permanently degrading catalytic activity and requiring costly catalyst replacement or regeneration.
Nitrogen Gas Filling & Cylinder Charging Stations
Industrial gas filling stations and cylinder charging facilities require high-pressure nitrogen compressors to fill standard gas cylinders (typically 15 MPa working pressure) and tube trailers (up to 20 MPa). While the LW-25/16’s 1.60 MPa discharge pressure does not directly achieve cylinder filling pressure, it serves as an potenziatore intermedio in multi-stage compression trains, compressing nitrogen from atmospheric or low-pressure sources to the suction pressure of high-pressure diaphragm or piston compressors. The oil-free design ensures that nitrogen entering the high-pressure stage is completely uncontaminated, preventing oil accumulation in high-pressure cylinders and tube trailers that could compromise gas purity and create safety hazards.
Food & Beverage High-Pressure Nitrogen Injection
Large-scale food and beverage processing facilities utilize high-pressure nitrogen for product dispensing systems, pressurized packaging, and controlled atmosphere storage at elevated pressure. The LW-25/16’s 1.60 MPa discharge pressure is sufficient for direct injection into pressurized product tanks and dispensing systems without intermediate boosting. The oil-free certification ensures compliance with FDA 21 CFR 173.310 and EU Regulation 231/2012 for food-contact nitrogen. The 25 m³/min capacity supports high-throughput production lines where multiple dispensing stations operate simultaneously.
Materiali e costruzione
The LW-25/16 is constructed from premium materials specifically selected for high-pressure nitrogen service, thermal stress resistance, and extended operational life:
| Componente | Materiale | Specifiche |
|---|---|---|
| Cylinder Block | Ghisa grigia | GG30 / HT300, reinforced wall sections, integral cooling jackets |
| Albero motore | acciaio legato forgiato | 42CrMo4, Q&T, enlarged bearing journals, ISO 1940 G2.5 balanced |
| Fasce elastiche del pistone | High-Pressure PTFE Composite | Self-lubricating, high-temp rated to 200°C, wear rate <0.04 mm/1000h |
| Fasce dei cavalieri | Composito in PTFE | Piston guidance, anti-scuffing, high-pressure rated |
| Piastre delle valvole | acciaio inossidabile | SS316, high-pressure concentric ring spring-loaded design |
| Connecting Rods | Forged Steel with Babbitt Bearings | Reinforced big end, oil-lubricated, precision-machined |
| Intercooler | Guscio in acciaio al carbonio / Tubi in acciaio inox SS316 | High-pressure rated, ASME VIII Div.1, 1.5× hydrotest |
| Postrefrigeratore | Guscio in acciaio al carbonio / Tubi in acciaio inox SS316 | High-pressure finned tube, 32°C cooling water rated |
| Tubazioni ad alta pressione | Seamless Carbon Steel | ASTM A106 Gr.B, Schedule 80, 100% RT inspected |
Tutti i componenti portanti sono progettati e fabbricati in stretta conformità con ASME BPVC Sezione VIII Divisione 1 or Chinese GB 150 standards, with additional safety margins for high-pressure service. Every weld joint undergoes 100% radiographic inspection (RT) per ASME Section V, Article 2, and each completed pressure vessel is subjected to a hydrostatic pressure test at 1.5 times the maximum allowable working pressure (MAWP) for a minimum hold period of 30 minutes. High-pressure piping is 100% pneumatically tested at 1.1× MAWP after hydrostatic testing.
Linee guida per l'installazione e la manutenzione
Requisiti strutturali e di fondazione
The LW-25/16 has a dry weight of 4.50 tonnes and a center of gravity approximately 950 mm above the baseplate. Due to the substantially higher mechanical forces generated by 1.60 MPa discharge pressure, a reinforced concrete inertia block of 9–12 tonnes is required. The block must be mounted on heavy-duty vibration isolators (natural frequency 5–7 Hz) capable of accommodating the elevated dynamic loads. Foundation design must account for the peak cylinder forces, which are significantly higher than those of lower-pressure compressors of equivalent capacity. Minimum clearance requirements: 1.5 m on the non-drive side for valve access, 1.2 m on the drive side for motor maintenance, and 2.0 m overhead for crane access during major overhauls.
Progettazione del sistema di raffreddamento ad acqua
La richiesta di acqua di raffreddamento è approssimativamente 28 m³/h at an inlet temperature not exceeding 32°C. The high-pressure intercooler and aftercooler require particularly effective cooling to manage the substantial heat of compression at 1.60 MPa. Water quality specifications: pH 6.5–8.5, total dissolved solids < 400 mg/L, chloride content < 40 mg/L (critical for SS316 tube corrosion prevention), suspended solids < 25 mg/L, and total hardness < 250 mg/L as CaCO₃. A closed-loop cooling tower with side-stream filtration and chemical treatment is strongly recommended for all installations to ensure consistent water quality and prevent scale formation in high-pressure heat exchanger tubes.
Programma di manutenzione preventiva
| Intervallo | Articolo di servizio | Azione richiesta |
|---|---|---|
| Quotidiano | Ispezione operativa | Check vibration levels, abnormal noise, cooling water flow, discharge temperature and pressure |
| 200 hours | Ispezione della piastra delle valvole | Remove and inspect suction/discharge valves for carbon deposits, spring fatigue, or cracking |
| 800 hours | Valutazione dell'usura delle fasce elastiche del pistone | Misurare il gioco della scanalatura delle fasce elastiche; sostituire le fasce se il gioco supera 0,20 mm. |
| 3,500 hours | Revisione intermedia | Sostituire tutte le fasce elastiche del pistone, le fasce di scorrimento e i gruppi della piastra delle valvole. |
| 7,000 hours | Revisione completa | Inspect crankshaft journals, measure main bearing clearances, replace bearings if >0.06 mm |
The oil-free design of the LW-25/16 significantly reduces maintenance complexity compared to lubricated high-pressure alternatives. There are no oil changes to schedule, no lubricating oil samples to analyze, no oil filter elements to replace, and no high-pressure oil separator cartridges to monitor. The primary consumable wear items are the Fasce elastiche e anelli di scorrimento in PTFE, which typically achieve 3,500–5,000 hours of service life under clean nitrogen conditions at high pressure. Valve plate assemblies generally achieve 2,000–3,500 hours before requiring refurbishment in high-pressure service.
Certificazioni di conformità e sicurezza
The LW-25/16 nitrogen compressor is designed, manufactured, and tested to meet or exceed the following international standards and regulatory frameworks:
ASME BPVC Section VIII Div.1, GB 150-2011, PED 2014/68/EU Module A (Category III)
IEC 60034-1 (efficienza IE3), IEC 60204-1, sicurezza macchinari ISO 12100
ISO 8573-1 Classe 0 (Contenuto di olio), testato in modo indipendente da TÜV Rheinland
ISO 9001:2015 (Gestione della Qualità), ISO 14001:2015 (Gestione Ambientale)
Nitrogen is classified as a simple asphyxiant gas. All LW-25/16 installations must incorporate continuous oxygen deficiency monitoring in the compressor room and all adjacent areas where high-pressure nitrogen leakage could accumulate. Ventilation systems must be engineered to maintain ambient oxygen concentrations above 19.5% volume per OSHA 29 CFR 1910.146. Emergency shutdown interlocks should activate at 19.5% O₂ (alarm) and trigger automatic compressor isolation at 18.0% O₂ (hard shutdown). High-pressure nitrogen systems require additional safety measures including pressure relief valves, rupture discs, and automatic isolation valves on the discharge line. Personnel entry procedures into enclosed compressor rooms must include portable oxygen monitors and a buddy-system protocol. All high-pressure piping must be protected from mechanical damage and clearly labeled.
Analisi delle prestazioni e dell'efficienza
The LW-25/16 achieves a specific power consumption of approximately 8.00 kW per m³/min of nitrogen delivered at 1.60 MPa discharge pressure. This efficiency metric reflects the thermodynamic challenges inherent in compressing to elevated pressure ratios, yet remains competitive within the high-pressure oil-free piston compressor segment. For comparison, oil-lubricated screw compressors operating at equivalent pressure ratios typically consume 8.5–9.5 kW/m³/min, while high-pressure diaphragm compressors (often selected for oil-free applications) can exceed 12 kW/m³/min.
Over a standard 8,000-hour annual operating schedule, the LW-25/16’s efficiency advantage versus less efficient alternatives yields approximately 100,000–240,000 kWh of annual energy savings. At an average industrial electricity tariff of $0.08/kWh, this represents $8,000–$19,200 in direct operating cost reduction per year. However, the primary economic driver for LW-25/16 selection is typically the elimination of oil-related consumables and downstream purification equipment rather than marginal energy savings.
IL costo totale di proprietà per la compressione di azoto ad alta pressione is further reduced by the absence of oil in the compression path. A typical oil-lubricated high-pressure compressor of this size requires coalescing filters, activated carbon adsorbers, oil monitoring instrumentation, and periodic oil changes that collectively add $15,000–$25,000 in annual operating costs. The LW-25/16’s oil-free design eliminates these expenses entirely while simultaneously improving reliability by removing the most common failure mode in high-pressure compressors: oil system contamination and degradation.
Capacità di personalizzazione e produzione OEM
We offer comprehensive customization options to adapt the LW-25/16 to specific site conditions, integration requirements, and end-user specifications:
- Pacchetti chiavi in mano con montaggio su skid: The compressor, motor, intercooler, aftercooler, high-pressure instrumentation, and control panel are pre-assembled on a structural steel skid with integrated lifting lugs and anchor bolt templates. Factory pre-testing of all systems reduces field commissioning time by approximately 60% and minimizes startup risks.
- Configurazioni delle aree pericolose: ATEX Zone 2 and IECEx compliant motor and electrical enclosures are available for installations in petrochemical facilities where explosive atmospheres may occasionally be present. Integrated gas detection and automatic ventilation interlocks can be incorporated into the control system.
- Controllo avanzato dei processi: Optional Siemens S7-1200 or Allen-Bradley CompactLogix PLC with 10-inch HMI touchscreen, remote monitoring via Modbus TCP/IP or OPC-UA, and seamless integration with plant DCS/SCADA systems. Automatic load/unload control and variable frequency drive (VFD) compatibility optimize part-load efficiency.
- High-Pressure Safety Systems: Automatic pressure relief valves, rupture disc assemblies, high-pressure isolation valves, and emergency depressurization systems can be integrated into the discharge piping. All safety systems are designed to ASME BPVC Section VIII requirements.
- Protezione ambientale: C5-M marine-grade coating systems for coastal installations; tropicalized electrical components for ambient temperatures up to 55°C; and IP54-rated acoustic enclosures reducing noise emission from 87 dB(A) to 74 dB(A) at 1 meter.
- OEM e Private Label: Custom paint colors, branded nameplates, and localized documentation packages for gas equipment distributors and system integrators.
Le configurazioni personalizzate sono disponibili da Quantità minima d'ordine: 1 unità. Engineering review and proposal generation typically require 5–7 business days. Standard delivery time is 12–14 weeks; repeat orders are delivered in 8–10 weeks from order confirmation.
Case Study: Petrochemical Reactor Inerting System Upgrade
Cliente: A major petrochemical complex in the Middle East operating polyethylene and polypropylene production units
Sfida: The client’s existing high-pressure nitrogen supply for reactor inerting and catalyst preservation was provided by two oil-lubricated reciprocating compressors (American brand, 20 years in service). Oil carryover into the nitrogen stream was contaminating Ziegler-Natta catalyst beds, reducing polymerization efficiency by 8–12% and requiring catalyst replacement every 14 months instead of the designed 24-month interval. The oil was also fouling reactor internals, necessitating unplanned shutdowns for cleaning. Annual losses from catalyst degradation and unplanned downtime exceeded $2.3 million.
Soluzione: Abbiamo fornito un LW-25/16 oil-free nitrogen compressor as the primary high-pressure nitrogen source, configured on a custom skid with integrated intercooler, aftercooler, high-pressure safety systems (relief valves, rupture discs, isolation valves), and a Siemens S7-1200 PLC control panel with SCADA integration. The 1.60 MPa discharge pressure met all reactor inerting and catalyst preservation requirements. A redundant standby unit was installed for 100% availability.
Quantified Results After 30 Months:
- Nitrogen oil content: Reduced from 5.8 mg/m³ to <0.01 mg/m³, achieving ISO 8573-1 Class 0 certification
- Catalyst replacement interval: Extended from 14 months to 28 months, saving $1.8 million/year in catalyst costs
- Polymerization efficiency: Improved by 9.5%, increasing annual production by 12,000 tonnes
- Unplanned downtime: Eliminated—zero oil-related shutdowns in 30 months
- Overall maintenance cost: Reduced by 38% through elimination of oil system repairs and catalyst-related cleaning
“The LW-25/16 has been transformative for our operations. The elimination of oil contamination has restored our catalyst performance to design levels and completely eliminated the unplanned shutdowns that were costing us millions. The payback period was under 12 months.” — Vice President of Operations, Petrochemical Complex
Domande frequenti e guida alla selezione
Prodotti e tecnologie correlati
Compressori di azoto ad alta pressione serie DW
Designed for discharge pressures from 0.40 MPa to 2.00 MPa, the DW series covers nitrogen injection, high-pressure pipeline boosting, and chemical synthesis applications. Capacities from 2 to 130 m³/min with two-stage and multi-stage configurations.
Compressori multistadio senza olio serie ZW
Vertical, multi-stage oil-free compressors for oxygen, nitrogen, hydrogen, and specialty gases. Discharge pressures up to 9.00 MPa for ultra-high-pressure gas filling, cylinder charging, and chemical process applications.
Compressori di azoto ad alta capacità serie LW
Compressori a pistoni oil-free ad alta portata (20–130 m³/min) per il backup di unità di separazione aria-liquido criogeniche, il potenziamento di sistemi VPSA e la distribuzione industriale tramite condotte. Pressioni di mandata da 0,30 a 0,80 MPa.
Per una panoramica completa dei nostri compressore industriale di azoto Per maggiori informazioni sulla nostra gamma di prodotti, che comprende compressori di ossigeno senza olio, compressori di idrogeno, compressori di anidride carbonica e soluzioni personalizzate per gas speciali, contattate il nostro team di ingegneri applicativi o consultate il nostro catalogo prodotti online.
Pronti ad aggiornare il vostro sistema di azoto ad alta pressione?
Our application engineers are standing by to evaluate your high-pressure nitrogen flow requirements, suction conditions, discharge pressure targets, and integration constraints. We provide complimentary technical proposals, foundation layout drawings, piping and instrumentation diagrams (P&IDs), high-pressure safety system designs, and detailed total cost of ownership (TCO) analyses within 48 hours of receiving your inquiry.
E-mail: [email protected] Risposta entro 24 ore
