DW-60/8 窒素コンプレッサー – 高圧産業ガスネットワーク向け高耐久性オイルフリーN2ブースター

Engineered to deliver 60 m³/min at 0.80 MPa discharge pressure, the DW-60/8 is a two-stage, two-row oil-free piston nitrogen compressor purpose-built for large-scale cryogenic air separation, high-pressure VPSA booster stations, and demanding petrochemical pipeline distribution. Zero lubricant contamination, continuous-duty rated, and optimized for 24/7 industrial operation at elevated pressure.

製品概要

の DW-60/8 nitrogen compressor represents a significant advancement in our oil-free piston compressor portfolio, engineered to meet the dual demands of high flow capacity and elevated discharge pressure that characterize the most challenging industrial nitrogen applications. With a formidable 60 m³/min capacity paired with a 0.80 MPa discharge pressure, this unit occupies the upper tier of our DW series, bridging the gap between standard nitrogen boosting and high-pressure industrial gas distribution.

What distinguishes the DW-60/8 from conventional lubricated alternatives is its intrinsically oil-free compression mechanism. The piston rings and rider bands are fabricated from self-lubricating PTFE composite materials that operate entirely without hydrocarbon lubricants, ensuring the nitrogen product stream remains completely free of oil contamination. This design philosophy achieves ISO 8573-1クラス0認証をネイティブに取得, eliminating the need for costly downstream oil-filtration equipment that would otherwise be mandatory in food-grade, pharmaceutical, and electronics-grade nitrogen applications.

The compressor architecture follows a 二段二列 (二列二级) configuration that optimally distributes the substantial pressure ratio across two compression cylinders. This staged approach is critical for managing the thermal stresses associated with compressing nitrogen to 0.80 MPa while preserving the integrity of the PTFE sealing elements. Each stage incorporates an independent high-efficiency intercooler, maintaining gas temperatures within safe operating envelopes even during sustained maximum-capacity operation. The robust cast-iron frame and dynamically balanced forged steel crankshaft assembly are engineered for a minimum service life of 12万時間 標準的な保守手順に従って。

Technical Specifications – DW-60/8

* すべての仕様は標準基準条件（ISO 1217、附属書C）に基づいています。実際の性能は、設置場所の標高、周囲温度、および吸気条件によって異なる場合があります。

主な特長とエンジニアリング上の利点

1. High-Temperature PTFE Composite Sealing Technology

The DW-60/8 utilizes a proprietary 自己潤滑ピストンリングおよびライダーバンドアセンブリ manufactured from advanced PTFE composites reinforced with glass fiber, carbon fiber, and bronze particulates. This material formulation achieves a coefficient of friction below 0.06 without any external hydrocarbon lubrication, completely eliminating oil vapor carryover into the nitrogen product stream. The rings are specifically engineered for the elevated discharge temperatures associated with 0.80 MPa operation, maintaining dimensional stability and sealing integrity up to 185°C. For industrial gas operators, this translates to native ISO 8573-1 Class 0 compliance without the capital expenditure, maintenance burden, or energy penalty of downstream oil-filtration systems.

2. Advanced Two-Stage Thermodynamic Optimization

の 2段階圧縮アーキテクチャ of the DW-60/8 is thermodynamically optimized for the demanding 0.80 MPa discharge pressure target. By dividing the substantial pressure ratio between a low-pressure cylinder and a high-pressure cylinder, the compressor achieves a significantly lower mean effective temperature per stage compared to single-stage designs. A dedicated high-efficiency shell-and-tube intercooler between stages removes the heat of compression, maintaining discharge temperatures below 160°C even at maximum continuous load. This thermal management strategy is essential for preserving PTFE ring integrity at elevated pressure and extends valve plate service life by approximately 45% versus single-stage alternatives operating at equivalent pressure ratios.

3. Extended Horizontal Frame for Superior Stability

メインフレームは鋳造されています GG25 グレー鋳鉄 (equivalent to ASTM A48 Class 30B) with integral cooling water passages. The two-row opposed-cylinder arrangement provides natural first-order force cancellation, reducing unbalanced inertia forces transmitted to the foundation by over 80% compared to single-row designs. The extended horizontal layout (5000 mm length) provides exceptional structural rigidity and bearing support span, minimizing crankshaft deflection under the substantial torque loads of 60 m³/min compression. This mechanical advantage permits installation on a reinforced concrete inertia block of minimum 12 tonnes, significantly reducing civil engineering costs compared to equivalent single-row compressors.

4. Medium-Voltage Direct Drive for Industrial Power Systems

The DW-60/8 is driven by a 350 kW medium-voltage induction motor available in either 6kV or 10kV configurations, conforming to IEC 60034-1 efficiency class IE3. The medium-voltage drive eliminates the need for oversized low-voltage switchgear and heavy-gauge cabling that would be required for a 380V motor of this power rating. Direct integration into industrial medium-voltage distribution networks reduces electrical infrastructure costs, minimizes I²R losses in power cabling, and improves overall energy efficiency. For large-scale industrial facilities where 6kV or 10kV bus systems are standard, the DW-60/8 offers seamless electrical compatibility without additional transformation equipment.

アプリケーションシナリオ

Large-Scale Cryogenic Air Separation Distribution

In large cryogenic ASU facilities producing 2,500–6,000 Nm³/h of gaseous nitrogen, the DW-60/8 serves as the primary high-pressure nitrogen booster between the cold box and the industrial distribution network. Its 60 m³/min capacity exceeds the output of most medium-scale ASUs, providing reserve capacity for peak demand periods and allowing one compressor to serve multiple ASU trains. The 0.80 MPa discharge pressure provides substantial head for long-distance pipeline distribution to downstream consumers such as integrated steel mills, petrochemical complexes, LNG regasification terminals, and power generation facilities. The oil-free design is critical because any oil contamination would compromise nitrogen purity across the entire distribution network, affecting sensitive processes in semiconductor, pharmaceutical, and food manufacturing facilities served by the same header.

High-Pressure VPSA Nitrogen Booster Stations

For large VPSA nitrogen generators producing 99.5–99.9% purity nitrogen at near-atmospheric pressure, the DW-60/8 nitrogen booster compresses the low-pressure product to 0.80 MPa for high-pressure distribution. The elevated discharge pressure is particularly valuable for VPSA installations serving multiple consumers through a centralized header, where pressure losses across the distribution network can be substantial. The 60 m³/min capacity allows the DW-60/8 to serve as the primary booster for multiple VPSA trains operating in parallel, or to provide peak-shaving capacity during high-demand periods. The oil-free compression path is absolutely essential because hydrocarbon contamination would irreversibly poison the carbon molecular sieve adsorbent, permanently degrading separation efficiency and necessitating costly adsorbent replacement.

Petrochemical High-Pressure Process Nitrogen

In petrochemical and refinery operations, the DW-60/8 provides high-pressure nitrogen for reactor inerting, catalyst bed preservation, pipeline purging, emergency vessel injection, and hydrostatic testing. The 0.80 MPa discharge pressure is sufficient to overcome the pressure ratings of typical process vessels, reactor systems, and high-pressure pipeline segments, allowing direct nitrogen injection without intermediate boosting. The continuous-duty rating ensures uninterrupted nitrogen availability during extended turnaround and maintenance campaigns that may span several weeks. The oil-free certification is mandatory for petrochemical applications where nitrogen contacts catalyst beds or enters process streams that must remain completely hydrocarbon-free to prevent catalyst poisoning or product contamination.

LNG Plant Purge & Inerting Operations

LNG liquefaction and regasification facilities require large volumes of high-pressure nitrogen for cold box purging, pipeline inerting, storage tank blanketing, and emergency gas displacement. The DW-60/8’s 60 m³/min capacity and 0.80 MPa discharge pressure are ideally matched to the demanding requirements of LNG operations, where nitrogen must be delivered at sufficient pressure to overcome cryogenic system back-pressures and maintain positive inerting gas flow during all operational phases. The oil-free design prevents oil contamination of cryogenic heat exchangers and molecular sieve dryers, which would cause fouling, reduced heat transfer efficiency, and potential safety hazards in cryogenic service.

材料と構造

The DW-60/8 is constructed from premium materials selected for nitrogen compatibility, high-pressure service integrity, and extended operational life under demanding conditions:

すべての圧力支持部品は、以下の基準に厳密に従って設計および製造されています。 ASME BPVC セクション VIII ディビジョン 1 or Chinese GB 150 standards. Every weld joint undergoes 100% radiographic inspection (RT) per ASME Section V, Article 2, and each completed pressure vessel is subjected to a hydrostatic pressure test at 1.5 times the maximum allowable working pressure (MAWP) for a minimum hold period of 30 minutes.

設置およびメンテナンスに関するガイドライン

基礎および構造要件

The DW-60/8 has a dry weight of 6.00 tonnes and a center of gravity approximately 850 mm above the baseplate. The two-row opposed-cylinder design minimizes unbalanced forces, permitting installation on a reinforced concrete inertia block of 12–15 tonnes. The block should be mounted on elastomeric vibration isolators (natural frequency 6–8 Hz) to prevent vibration transmission to adjacent structures and sensitive instrumentation. Minimum clearance requirements: 1.5 m on the non-drive side for valve access, 1.2 m on the drive side for motor maintenance, and 2.0 m overhead for crane access during major overhauls. The extended 5000 mm length requires a minimum machinery room dimension of 7000 mm to accommodate the compressor plus maintenance clearances.

冷却水システムの設計

冷却水の需要は約 60 m³/h at an inlet temperature not exceeding 32°C. The water distribution circuit supplies the cylinder jackets, intercooler, and aftercooler in parallel branches. Water quality specifications: pH 6.5–8.5, total dissolved solids < 500 mg/L, chloride content < 50 mg/L (to prevent SS316 tube corrosion in the coolers), suspended solids < 30 mg/L, and total hardness < 300 mg/L as CaCO₃. For sites with marginal water quality or high ambient temperatures, a closed-loop cooling tower with side-stream filtration and chemical treatment is strongly recommended to prevent scale formation, corrosion, and biological fouling.

予防保守スケジュール

The oil-free design of the DW-60/8 dramatically reduces maintenance complexity compared to lubricated alternatives. There are no oil changes to schedule, no lubricating oil samples to analyze, no oil filter elements to replace, and no oil separator cartridges to monitor. The primary consumable wear items are the PTFE製ピストンリングおよびライダーバンド, which typically achieve 4,000–6,000 hours of service life under clean nitrogen conditions. This maintenance simplification translates to lower labor costs, reduced spare parts inventory, and higher equipment availability for continuous industrial operations.

法令遵守および安全認証

The DW-60/8 nitrogen compressor is designed, manufactured, and tested to meet or exceed the following international standards and regulatory frameworks:

パフォーマンスと効率の分析

The DW-60/8 achieves a specific power consumption of approximately 5.83 kW per m³/min of nitrogen delivered at 0.80 MPa discharge pressure. This efficiency metric is competitive for an oil-free piston compressor operating at a substantial pressure ratio, positioning the unit favorably within the 50–70 m³/min high-pressure capacity class. For comparison, oil-lubricated screw compressors in similar high-pressure applications typically consume 6.2–7.0 kW/m³/min, while legacy single-stage piston designs may exceed 7.5 kW/m³/min at equivalent discharge pressures.

Over a standard 8,000-hour annual operating schedule, the DW-60/8’s efficiency advantage generates approximately 144,000–336,000 kWh of annual energy savings compared to less efficient alternatives. At an average industrial electricity tariff of $0.08/kWh, this represents $11,520–$26,880 in direct operating cost reduction per year. When combined with the complete elimination of oil-related consumables (lubricating oil, filter elements, separator cartridges, waste oil disposal, and oil analysis), the 窒素圧縮の総所有コスト is reduced by an estimated 22–32% over a 10-year operational life.

The absence of oil in the compression path also eliminates the energy penalty associated with downstream oil-removal equipment. A typical oil-lubricated compressor of this size and pressure rating requires coalescing filters, activated carbon adsorbers, and continuous oil monitoring instrumentation that collectively consume 3–5% of the compressor’s power output. The DW-60/8’s oil-free design removes this parasitic load entirely, further improving effective system efficiency and reducing the total electrical demand of the nitrogen compression station.

カスタマイズおよびOEM対応

We offer comprehensive customization options to adapt the DW-60/8 to specific site conditions, integration requirements, and end-user specifications:

• スキッドマウント型ターンキーパッケージ： The compressor, motor, intercooler, aftercooler, instrumentation, and control panel are pre-assembled on a structural steel skid with integrated lifting lugs and anchor bolt templates. This approach reduces field installation time by approximately 60% and minimizes commissioning risks through factory pre-testing of all systems.
• 危険区域構成： ATEX Zone 2 and IECEx compliant motor and electrical enclosures are available for installations in petrochemical facilities where explosive atmospheres may occasionally be present. Integrated gas detection and automatic ventilation interlocks can be incorporated into the control system.
• 高度なプロセス制御： Optional Siemens S7-1200 or Allen-Bradley CompactLogix PLC with 10-inch HMI touchscreen, remote monitoring via Modbus TCP/IP or OPC-UA, and seamless integration with plant DCS/SCADA systems. Automatic load/unload control and variable frequency drive (VFD) compatibility optimize part-load efficiency and reduce mechanical wear during startup.
• Environmental Protection Systems: C5-M marine-grade coating systems for coastal or offshore installations; tropicalized electrical components for ambient temperatures up to 55°C; and IP54-rated acoustic enclosures that reduce noise emission from 85 dB(A) to 72 dB(A) at 1 meter, suitable for indoor installations without dedicated compressor houses.
• OEM & Private Label Programs: Custom paint colors, branded nameplates, and localized documentation packages are available for gas equipment distributors and system integrators. Technical manuals, spare parts lists, and maintenance procedures can be supplied in multiple languages.

カスタム構成は以下から入手可能です 最小注文数量：1個. Engineering review and proposal generation typically require 5–7 business days. Standard delivery time is 12–14 weeks; repeat orders are delivered in 8–10 weeks from order confirmation.

Case Study: Petrochemical Complex Nitrogen Distribution Upgrade

クライアント： A major petrochemical complex in the Middle East with ethylene cracking, polyethylene production, and aromatic processing units

チャレンジ： The complex’s existing nitrogen supply consisted of three oil-lubricated compressors (European brand, 20 years in service) feeding a common 0.60 MPa distribution header. The compressors were experiencing progressive oil carryover into the nitrogen stream, contaminating catalyst beds in the ethylene cracking unit and causing unplanned shutdowns. The 0.60 MPa pressure was also insufficient for new high-pressure reactor inerting requirements. Maintenance costs had escalated to $120,000/year, and spare parts availability was becoming problematic due to the age of the equipment.

解決： 私たちは供給しました DW-60/8 oil-free nitrogen compressor as the primary replacement unit, configured on a custom skid with integrated intercooler, aftercooler, and a Siemens S7-1200 PLC control panel with full SCADA integration. The 0.80 MPa discharge pressure met the new reactor inerting requirements, while the oil-free design eliminated catalyst bed contamination. A 5 m³ surge vessel was installed upstream to buffer demand fluctuations from the multiple process units. The existing 0.60 MPa compressors were retained as standby units, providing redundancy during maintenance periods.

24か月後の定量的な結果：

• 窒素油含有量： Reduced from 5.1 mg/m³ to <0.01 mg/m³ISO 8573-1クラス0認証を取得
• Catalyst bed contamination incidents: Eliminated completely, improving ethylene cracking unit availability by 3.5%
• Annual maintenance cost: Reduced by 48% ($120,000 to $62,400) through elimination of oil-related repairs and improved parts availability
• エネルギー消費量： Improved by 5.9% versus the primary replaced unit, saving approximately $16,800/year
• 予期せぬシステム停止： イベントゼロ 24ヶ月間の連続稼働

“The DW-60/8 has completely transformed our nitrogen reliability. The elimination of oil contamination has been the single biggest improvement—our catalyst beds are running cleaner than ever, and our unplanned shutdowns due to nitrogen issues have dropped to zero. The 0.80 MPa pressure also gives us the flexibility we needed for our new reactor systems.” — Process Engineering Manager, Petrochemical Complex

よくある質問と選択ガイド

関連製品およびソリューション

当社の包括的な概要については、 工業用窒素圧縮機 オイルフリー酸素圧縮機、水素圧縮機、二酸化炭素圧縮機、および特注設計の特殊ガスソリューションを含む製品ポートフォリオの詳細については、当社のアプリケーションエンジニアリングチームにお問い合わせいただくか、オンライン製品カタログをご覧ください。

Ready to Upgrade Your High-Pressure Nitrogen System?

当社のアプリケーションエンジニアが、お客様の窒素流量要件、吸引条件、吐出圧力目標、およびシステム統合上の制約を評価するために待機しております。お問い合わせをいただいてから48時間以内に、無料の技術提案書、基礎レイアウト図、配管計装図（P&ID）、および詳細な総所有コスト（TCO）分析をご提供いたします。

メールアドレス: [email protected] 24時間以内に返信いたします