China High Pressure 400bar Helium Hydrogen Gas Air Screw Diaphragm Compressor air compressor repair near me

Item Description

V sort diaphragm compressor for large purity gases

 

sort inlet strain
MPa(G)
outlet strain
MPa(G)
stream charge
Nm3/h
electrical power
kW
rotate speedr/min
1G3V-forty/13-I regular force one.3 40 15 330
2G3V-forty/thirteen-a hundred and fifty one.3 15 forty 15 400
H-GV3-950/sixty nine-80 six.nine eight. 950 eighteen.five four hundred
H-GV3-60/2-seventy four .2 7.four 60 22 four hundred
GV3-a hundred/17-250 1.7 25 one hundred thirty four hundred
GV3-200/a hundred and forty-three hundred fourteen 30 200 30 400
G2.5V-ten/two hundred standard pressure twenty ten seven.5 four hundred
G2.5V-10/1-one hundred sixty .1 16 ten eleven four hundred
G2.5V-twenty/4-350 .four 35 twenty 11 400
G2.5V-20/4-one hundred sixty .four 16 20 eleven 400
G2.5V-twenty/4-250 .4 twenty five twenty 11 400
CG2V-5/two hundred normal strain 20 5. three. four hundred
G2V-10/thirteen standard force 1.three ten three. four hundred
G2V-5/4-350 .four 35 5. three. 400
G2V-8/2.5-one hundred sixty .25 sixteen eight. five.5 four hundred
G2V-5/4-one hundred sixty .four 16 five. five.5 four hundred

one  Equipment specs and demands
one.1 Location and internet site conditions:
(1)      installation location: Indoor
(2)    :  dIIBT4,
Explosion protection requirements: Motor dIIBT4, 
1.2:  Common engineering requirements
(1)     Cooling water
 Pressure                       3~5 Bar (G)
Drinking water inlet temperature        ≤ 30ºC
 (2) Electric powered                         3P/380  VAC/ 50HZ, 
1.3 Drive strategy: Electric motor , Belt push
1.4  Processing technology and parameter demands
(1)Suction force:            7 bar  (G)
(2) Discharge pressure:          160bar (G) 
(3) Suction Ability:            50Nm3/h
(4)  Media:                 CH4 C2H4
(5) Suction temperature:         ≤30 ºC
(6) Temperature of drinking water inlet:    ≤30 ºC

2 Technical Parameters

2.1  Main Technical Requirements
(1) Product:                       GL2-fifty/7-a hundred and sixty
(2) Type                       
L-sort, h2o-cooling,two-phase Compression
(3) Travel approach      Crank shaft and connecting rod
(4)  Media    :             CH4  C2H4
(5)Suction Potential:            50Nm3/h
(6) Suction strain:            7 bar  (G)
(7) Discharge pressure:           160bar(G)
(8) Suction temperature:           ≤30 ºC
(9)Discharge temperature:         ≤45 ºC
(ten)Lube oil temperature:        ≤70 ºC
(11) Crank shaft speed:        420r/min
(twelve) Piston stroke:             105 mm
(13) Shaft electrical power:                ≤9.5.kW
(fourteen) Drinking water-inlet temperature:       ≤30 ºC
(fifteen) Cooling drinking water usage    1200L/h
(16)Lube oil trademark:        L-HM -sixty eight
                                      L-HM-sixty eight# Chemical-Resistant Lube oil
(18) :Amount of the first oil:       25Kg
(19) Transmission method:          strap transmission
2.2  Electromotor
(1)Design:                         YB3-160L-4 
(2) Electricity:                       15kW
(3) Electromotor pace:             1460r/min
(4) Offer voltage                 380V/50Hz
(5) Defend exploding quality:     dIIBT4
(6) Defend and insulation request:  IP55/F
2.2.1 Electromotor
(1)Design:                         YB3-80L-4 
(2) Electricity:                       .75kW
(3) Electromotor velocity:            1400r/min
(4) Offer voltage                 380V/50Hz
two.3 Compressor skid
(1) Proportions:     1700×850×1150mm
(2) Weight:                          1100 kg

3  Technical needs
three.1 Supplies in contact with the medium and compression
(1) Fuel include:                       3Cr13
(2) Diaphragms:                 /00Cr15Ni5.
(3) Suction valve and Discharge valve:  
  Hoerbiger / Cozzani,baohua
(4) 304 stainless steel
Pipeline, Joint, Flange, Cooler, etc.,  304stainless steel 
three.2 Important accessory content
(1) Diaphragm head:                  45
(2) Perforated plate:                45
(3) Piston pole:                    40Cr
(4) Crankcase:                      HT200
(5) Cross-head:                     QT600-3
(6) Oil-pipeline                     304  stainless steel
(7) Strap                      Anti static triangle belt
3.3   The request to Products
(1) Compressor,electromotor,assistant gear,gauge and pipeline set up on the underpan
(2) Supply Specialties instruments,spare elements and document 1 established.
(3) PIDAffording the control basic principle drawing.
3.4  All of the compressor handle
(1)Automobile alarm for 1st phase diaphragm rupture
Vehicle alarm for 1st stage diaphragm rupture,the strain is increased than .25MPa, compressor alarm shutdown, 
(2) Automobile alarm for 1st stage diaphragm rupture
Auto alarm for 2st phase diaphragm rupture,the strain is larger than .25Mpa, compressor alarm shutdown, 

four Higher exhaust pressure security
16.5 MPa,
Exhaust pressure is greater than 16.5mpa, compressor alarm
 

US $12,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: 10024-97-2
Warranty: 1year
Principle: Diaphragm Compressor

###

Customization:

###

type inlet pressure
MPa(G)
outlet pressure
MPa(G)
flow rate
Nm3/h
power
kW
rotate speedr/min
1G3V-40/13-I normal pressure 1.3 40 15 330
2G3V-40/13-150 1.3 15 40 15 400
H-GV3-950/69-80 6.9 8.0 950 18.5 400
H-GV3-60/2-74 0.2 7.4 60 22 400
GV3-100/17-250 1.7 25 100 30 400
GV3-200/140-300 14 30 200 30 400
G2.5V-10/200 normal pressure 20 10 7.5 400
G2.5V-10/1-160 0.1 16 10 11 400
G2.5V-20/4-350 0.4 35 20 11 400
G2.5V-20/4-160 0.4 16 20 11 400
G2.5V-20/4-250 0.4 25 20 11 400
CG2V-5/200 normal pressure 20 5.0 3.0 400
G2V-10/13 normal pressure 1.3 10 3.0 400
G2V-5/4-350 0.4 35 5.0 3.0 400
G2V-8/2.5-160 0.25 16 8.0 5.5 400
G2V-5/4-160 0.4 16 5.0 5.5 400
US $12,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: 10024-97-2
Warranty: 1year
Principle: Diaphragm Compressor

###

Customization:

###

type inlet pressure
MPa(G)
outlet pressure
MPa(G)
flow rate
Nm3/h
power
kW
rotate speedr/min
1G3V-40/13-I normal pressure 1.3 40 15 330
2G3V-40/13-150 1.3 15 40 15 400
H-GV3-950/69-80 6.9 8.0 950 18.5 400
H-GV3-60/2-74 0.2 7.4 60 22 400
GV3-100/17-250 1.7 25 100 30 400
GV3-200/140-300 14 30 200 30 400
G2.5V-10/200 normal pressure 20 10 7.5 400
G2.5V-10/1-160 0.1 16 10 11 400
G2.5V-20/4-350 0.4 35 20 11 400
G2.5V-20/4-160 0.4 16 20 11 400
G2.5V-20/4-250 0.4 25 20 11 400
CG2V-5/200 normal pressure 20 5.0 3.0 400
G2V-10/13 normal pressure 1.3 10 3.0 400
G2V-5/4-350 0.4 35 5.0 3.0 400
G2V-8/2.5-160 0.25 16 8.0 5.5 400
G2V-5/4-160 0.4 16 5.0 5.5 400

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China High Pressure 400bar Helium Hydrogen Gas Air Screw Diaphragm Compressor     air compressor repair near meChina High Pressure 400bar Helium Hydrogen Gas Air Screw Diaphragm Compressor     air compressor repair near me
editor by czh 2022-12-07