Máy nén khí nitơ ZW-6/7 – Máy tăng áp N2 không dầu chính xác cao dành cho các ứng dụng quy trình áp suất trung bình

Delivering 6 m³/min at 0.70 MPa discharge pressure, the ZW-6/7 is a two-stage, two-row oil-free piston nitrogen compressor engineered for precision process control, small-scale VPSA nitrogen boosting, and medium-pressure industrial gas distribution. Zero lubricant contamination, compact footprint, and optimized for reliable continuous-duty operation.

Tổng quan sản phẩm

Cái ZW-6/7 nitrogen compressor is a precision-engineered member of our oil-free piston compressor family, purpose-built for applications demanding both compact dimensions and elevated discharge pressure. With a rated capacity of 6 m³/min và áp suất xả là 0.70 MPa, this unit occupies a unique niche between small laboratory compressors and large industrial boosters, serving process industries that require medium-pressure nitrogen in moderate flow quantities.

Unlike conventional lubricated compressors that necessitate elaborate downstream purification trains, the ZW-6/7 operates on a fully oil-free compression principle. Its PTFE composite piston rings and rider bands function without hydrocarbon lubricants, ensuring the nitrogen product stream maintains ISO 8573-1 Class 0 oil content certification. This inherent purity is indispensable for pharmaceutical process inerting, electronics soldering atmosphere control, and precision chemical synthesis where even trace oil contamination can compromise product integrity.

Cái hai giai đoạn, hai hàng architecture divides the compression workload across paired cylinders, with an inter-stage cooler maintaining gas temperatures within safe thermal envelopes. Despite its modest 6 m³/min capacity, the ZW-6/7 achieves a 0.70 MPa discharge pressure through optimized thermodynamic staging—delivering the pressure performance of larger units within a footprint of just 720 × 763 × 1475 mm and a weight of 0.80 tonnes.

Technical Specifications – ZW-6/7

* Tất cả các thông số kỹ thuật được đánh giá theo điều kiện tham chiếu tiêu chuẩn (ISO 1217, Phụ lục C). Hiệu suất thực tế có thể thay đổi tùy thuộc vào độ cao của địa điểm, nhiệt độ môi trường và điều kiện đầu vào.

Các tính năng chính và ưu điểm kỹ thuật

1. Ultra-Compact Vertical Design

The ZW-6/7 achieves exceptional space efficiency through a vertically oriented crankcase that minimizes longitudinal footprint while preserving full maintenance access. At 720 × 763 × 1475 mm, the unit occupies less than 0.55 m² of floor area—comparable to a standard office desk. This dimensional economy makes the ZW-6/7 ideal for installations in crowded utility rooms, containerized systems, mobile nitrogen supply trailers, and retrofit applications where existing machinery rooms lack space for larger equipment. The 0.80-tonne weight permits positioning by standard pallet jack or manual hydraulic lift, eliminating the need for overhead cranes or forklift equipment.

2. Advanced Oil-Free PTFE Sealing System

The ZW-6/7 employs a cụm vòng piston tự bôi trơn và vòng đai dẫn hướng manufactured from high-density PTFE composites reinforced with glass fiber and bronze micro-particles. This material matrix achieves a dynamic coefficient of friction below 0.08 without any hydrocarbon lubricant, delivering Hàm lượng dầu theo tiêu chuẩn ISO 8573-1 Loại 0 certification directly at the compressor discharge. For process industries where nitrogen purity is non-negotiable—such as pharmaceutical sterile manufacturing, electronics wafer fabrication, and food-grade packaging—this native oil-free performance eliminates the capital expense, energy penalty, and maintenance burden of downstream coalescing filters, activated carbon adsorbers, and oil monitoring instrumentation.

3. Two-Stage Thermodynamic Optimization for 0.70 MPa

Cái two-stage, two-row compression architecture is specifically optimized for the 0.70 MPa discharge pressure target. The first-stage cylinder compresses nitrogen from suction pressure to an intermediate pressure, after which a shell-and-tube intercooler reduces the gas temperature before second-stage compression to final discharge pressure. This staged approach limits the pressure ratio per cylinder to approximately 2.6:1, maintaining discharge temperatures below 145°C and preventing thermal degradation of the PTFE sealing elements. The two-row opposed-cylinder arrangement provides inherent first-order force balance, reducing vibration transmission to the foundation by over 80% compared to single-row designs of equivalent capacity.

4. Efficient 45 kW 380V Direct Drive

The ZW-6/7 is driven by a 45 kW, 380V, 50Hz three-phase induction motor conforming to IEC 60034-1 IE3 premium efficiency standards. The standard 380V configuration integrates directly into conventional industrial electrical panels without requiring medium-voltage infrastructure, specialized switchgear, or step-down transformers. This electrical simplicity is particularly advantageous for small and medium enterprises upgrading from bottled nitrogen or membrane generators to on-site compression, as it minimizes electrical installation costs and commissioning complexity. The motor is direct-coupled to the crankshaft via a flexible disc coupling, eliminating belt maintenance and alignment issues.

Các kịch bản ứng dụng

Small-Scale VPSA Nitrogen Booster Stations

For compact VPSA nitrogen generators producing 500–1,500 Nm³/h of 99.5–99.9% purity nitrogen at near-atmospheric pressure, the ZW-6/7 serves as the ideal booster companion. Its 6 m³/min capacity aligns with the output of small to medium VPSA units, while the 0.70 MPa discharge pressure provides sufficient head for distribution to multiple point-of-use stations within a facility. The ZW-6/7 nitrogen booster can be skid-mounted alongside the VPSA generator, creating a fully integrated on-site nitrogen supply system with a combined footprint under 15 m². The oil-free compression path is essential because any hydrocarbon contamination would irreversibly poison the carbon molecular sieve adsorbent, degrading separation efficiency and necessitating costly adsorbent replacement.

Pharmaceutical Process Inerting & Sterile Manufacturing

Pharmaceutical manufacturing facilities require nitrogen for reactor inerting, sterile powder conveying, vial headspace purging, and lyophilization chamber atmosphere control. The ZW-6/7’s 0.70 MPa discharge pressure is well-suited for feeding medium-pressure nitrogen headers serving multiple process skids, while its oil-free certification ensures compliance with FDA 21 CFR 211 (Current Good Manufacturing Practice) and EU GMP Annex 1 (Manufacture of Sterile Medicinal Products). The compact dimensions allow installation within existing pharmaceutical utility corridors without disrupting cleanroom layouts or requiring structural modifications.

Electronics Assembly & Semiconductor Support

In electronics manufacturing, nitrogen is deployed for reflow soldering atmosphere control, wave soldering inerting, dry cabinet storage, and component tape-and-reel packaging. The ZW-6/7’s 6 m³/min capacity can simultaneously supply multiple soldering lines and storage cabinets within a medium-sized electronics assembly facility. The oil-free design is absolutely critical in this sector because even sub-ppm oil contamination can cause solder joint defects, conformal coating delamination, and contamination of optical sensors or camera modules. The 0.70 MPa pressure provides adequate head for nitrogen distribution through standard polyethylene or copper piping networks spanning up to 500 meters.

Precision Chemical Synthesis & Catalyst Protection

Specialty chemical manufacturers and catalyst producers utilize nitrogen for reactor blanketing, catalyst bed preservation, solvent degassing, and product transfer under inert atmosphere. The ZW-6/7’s 0.70 MPa discharge pressure is sufficient for pressurized transfer of sensitive chemicals between process vessels and for maintaining positive pressure in catalyst storage silos. The oil-free compression ensures that no hydrocarbon contaminants are introduced into the process stream, which is particularly important for catalyst manufacturing where trace oil can poison active sites and reduce catalytic efficiency by 15–30%.

Vật liệu & Xây dựng

The ZW-6/7 is fabricated from materials meticulously selected for nitrogen compatibility, corrosion resistance, and compact structural integrity:

All pressure-bearing components are designed and manufactured in accordance with ASME BPVC Phần VIII Phân khu 1 or Chinese GB 150 standards. Weld joints undergo 100% radiographic inspection (RT), and each pressure vessel is hydrostatically tested at 1.5× MAWP for a minimum 30-minute hold period. The compact intercooler is specifically engineered for the ZW-6/7’s flow rate and pressure ratio, with tube-side velocities optimized for heat transfer efficiency without excessive pressure drop.

Hướng dẫn lắp đặt và bảo trì

Yêu cầu về nền móng và không gian

The ZW-6/7 weighs just 0.80 tonnes and features a remarkably low center of gravity due to its vertical design. A reinforced concrete pad of 1.5–2.0 tonnes is sufficient for stable operation, mounted on elastomeric vibration isolators (natural frequency 10–15 Hz). The two-row opposed-cylinder design inherently cancels first-order inertial forces, minimizing vibration transmission to adjacent sensitive equipment such as analytical balances or optical instruments. Required clearances: 0.6 m on the non-drive side for valve access, 0.5 m on the drive side for motor maintenance, and 1.0 m overhead for lifting the motor or compressor head.

Thông số kỹ thuật nước làm mát

Nhu cầu nước làm mát xấp xỉ 8 m³/h at an inlet temperature not exceeding 32°C. The compact intercooler and cylinder jackets share a common cooling water circuit. Acceptable water quality: pH 6.5–8.5, total hardness < 250 mg/L as CaCO₃, chloride < 50 mg/L, suspended solids < 20 mg/L. For installations without municipal water supply, a small closed-loop cooling system with a 0.5 m³ buffer tank and compact air-blast cooler is sufficient.

Lịch trình bảo trì phòng ngừa

The oil-free architecture of the ZW-6/7 eliminates the entire category of lubricant-related maintenance tasks. There are no oil changes to schedule, no oil analysis laboratory contracts to maintain, no filter elements to stock, and no oil separator cartridges to monitor. The sole recurring consumables are the vòng piston PTFE và vòng dẫn hướng, which typically achieve 4,000–6,000 hours of service life under clean nitrogen conditions. For a facility operating 6,000 hours per year, this translates to a single scheduled maintenance event annually.

Chứng nhận tuân thủ và an toàn

The ZW-6/7 nitrogen compressor meets or exceeds the following international standards and regulatory frameworks:

Phân tích hiệu suất và hiệu quả

The ZW-6/7 achieves a công suất tiêu thụ riêng xấp xỉ 7,50 kW/m³/phút of nitrogen delivered at 0.70 MPa discharge pressure. While this specific power is higher than our larger LW-series models due to the reduced scale efficiency inherent in smaller compressors, it remains competitive within the sub-10 m³/min oil-free piston segment. For comparison, oil-lubricated screw compressors in this capacity range typically consume 8.0–9.0 kW/m³/min, and diaphragm compressors (frequently specified for oil-free applications) can exceed 11 kW/m³/min.

Over a 6,000-hour annual operating schedule, the ZW-6/7’s efficiency advantage versus less efficient alternatives yields approximately 18,000–36,000 kWh of energy savings per year. At $0.08/kWh, this represents $1,440–$2,880 in annual electricity cost reduction. However, the dominant economic justification for ZW-6/7 selection in most applications is the elimination of oil-related consumables and downstream purification infrastructure thay vì chỉ tiết kiệm năng lượng ở mức độ nhỏ.

Cái tổng chi phí sở hữu cho hệ thống nén khí nitơ in small to medium applications is driven primarily by maintenance labor, consumables, and capital depreciation rather than energy. The ZW-6/7’s oil-free design eliminates oil changes ($300–600/year), filter replacements ($150–300/year), separator cartridge changes ($400–800/year), and oil analysis ($100–200/year), delivering total consumable savings of $950–$1,900 annually compared to lubricated alternatives. Additionally, the absence of downstream oil-removal equipment (coalescing filters, activated carbon adsorbers, oil monitors) eliminates capital costs of $8,000–$15,000 and associated energy penalties of 3–5% of compressor power.

Khả năng tùy chỉnh và sản xuất theo đơn đặt hàng (OEM)

We offer extensive customization options to adapt the ZW-6/7 to specific installation constraints, process requirements, and end-user preferences:

• Compact Skid Packages: Pre-assembled compressor, motor, intercooler, and control panel on a structural steel skid with forklift pockets. Reduces field installation to electrical connection and cooling water hookup only—typically completed within one working day.
• Mobile Trailer Systems: The ZW-6/7 can be mounted on a road-legal trailer with an integrated diesel generator, closed-loop cooling system, and nitrogen receiver, creating a fully mobile nitrogen supply unit for construction sites, pipeline purging, and emergency response operations.
• Intelligent Control Systems: Optional Siemens LOGO! or S7-1200 PLC with 7-inch HMI touchscreen, Ethernet connectivity, SMS/email alarm notifications, and Modbus TCP/IP compatibility for SCADA integration. Automatic load/unload control optimizes energy consumption during variable demand periods.
• Vách ngăn cách âm: Compact IP54-rated sound enclosure reducing noise emission from 80 dB(A) to 65 dB(A) at 1 meter, suitable for indoor installations in noise-sensitive environments such as laboratories, cleanrooms, and office-adjacent utility spaces.
• Chương trình OEM & Nhãn hiệu riêng: Custom paint colors, branded nameplates, localized documentation, and region-specific electrical certifications for gas equipment distributors and system integrators.

Bạn có thể tùy chỉnh cấu hình theo ý muốn. Số lượng đặt hàng tối thiểu: 1 đơn vị. Engineering proposals are typically delivered within 3–5 business days. Standard delivery time is 10–12 weeks from order confirmation; expedited delivery within 8 weeks is available for qualifying projects.

Case Study: Pharmaceutical Sterile Manufacturing Nitrogen Upgrade

Khách hàng: A sterile injectable pharmaceutical manufacturer in Thailand

Thử thách: The facility was utilizing an oil-lubricated nitrogen compressor (5-year-old European brand) for reactor inerting and vial headspace purging. During a routine FDA pre-approval inspection, oil contamination of 1.5 mg/m³ was detected in the nitrogen supply to the aseptic filling line. This finding triggered a warning letter and required immediate corrective action, including a production hold that cost approximately $250,000 in lost batches and delayed product launch.

Giải pháp: Chúng tôi đã cung cấp một ZW-6/7 oil-free nitrogen compressor as a direct replacement, mounted on a compact skid with an integrated aftercooler and Siemens LOGO! PLC control panel. The skid was designed to fit within the existing utility room (2.5 m × 1.5 m footprint) without requiring structural modifications. A 0.5 m³ nitrogen receiver was included to dampen pressure fluctuations during rapid valve cycling in the filling line.

Results After 12 Months:

• Hàm lượng nitơ trong dầu: Reduced from 1.5 mg/m³ to <0.01 mg/m³, achieving ISO 8573-1 Class 0 and satisfying FDA requirements
• FDA inspection outcome: Zero findings related to nitrogen quality in the subsequent follow-up inspection
• Gánh nặng bảo trì: Reduced by 60%—elimination of oil changes, filter replacements, and separator overhauls
• Thời gian ngừng hoạt động ngoài kế hoạch: Không có sự kiện nào in 12 months of continuous operation
• Production hold risk: Đã bị loại bỏ—no further nitrogen quality-related production interruptions

“The ZW-6/7 compressor solved our compliance crisis overnight. The FDA inspector specifically noted the oil-free certification in his report, and we have had zero nitrogen quality issues since installation. The compact size was a bonus—we didn’t need to expand our utility room.” — Quality Assurance Director, Pharmaceutical Manufacturer

Câu hỏi thường gặp & Hướng dẫn lựa chọn

Sản phẩm và giải pháp liên quan

Để có cái nhìn tổng quan đầy đủ về chúng tôi máy nén khí nitơ công nghiệp Để biết thêm chi tiết về danh mục sản phẩm, bao gồm máy nén oxy không dầu, máy nén hydro, máy nén carbon dioxide và các giải pháp khí chuyên dụng được thiết kế riêng, vui lòng liên hệ với đội ngũ kỹ sư ứng dụng của chúng tôi hoặc xem danh mục sản phẩm trực tuyến.

Ready to Upgrade Your Nitrogen Compression System?

Our application engineers are available to evaluate your nitrogen flow requirements, inlet conditions, discharge pressure targets, and integration constraints. We provide complimentary technical proposals, layout drawings, piping and instrumentation diagrams (P&IDs), and detailed total cost of ownership (TCO) analyses within 48 hours of receiving your inquiry.

E-mail: [email protected] | Phản hồi trong vòng 24 giờ