DW-60/30 Nitrogen Compressor – Ultra-High-Pressure Oil-Free N2 Booster for 3.00 MPa Industrial Process Applications

Engineered to deliver 60 m³/min at 3.00 MPa discharge pressure, the DW-60/30 is a two-stage, four-row oil-free piston nitrogen compressor designed for ultra-high-pressure nitrogen injection, gas liquefaction, chemical synthesis, and demanding petrochemical process applications. Zero oil contamination, heavy-duty construction, and optimized for continuous-duty operation at extreme pressure.

제품 개요

그만큼 DW-60/30 nitrogen compressor represents the pinnacle of our oil-free piston compressor engineering, purpose-built for applications where ultra-high discharge pressure is the defining requirement. With a formidable capacity of 60 m³/min 그리고 탁월한 3.00 MPa discharge pressure, this unit occupies the ultra-high-pressure segment of our industrial nitrogen compressor portfolio, serving the most demanding process applications in the global chemical, petrochemical, and energy sectors.

What distinguishes the DW-60/30 from all conventional alternatives is its fully oil-free compression pathway combined with ultra-high-pressure capability. The piston rings and rider bands are fabricated from advanced self-lubricating PTFE composite materials specifically formulated for extreme pressure service, ensuring the nitrogen stream remains completely free of hydrocarbon contamination even at 3.00 MPa. This achievement of ISO 8573-1 Class 0 certification at ultra-high pressure is a rare engineering feat that eliminates the need for downstream oil-removal systems that would be both technically challenging and economically prohibitive at this pressure level.

The compressor architecture employs a two-stage, four-row (二列四级) configuration that is essential for managing the extreme pressure ratio required to achieve 3.00 MPa discharge. The four-row design provides superior force balance and reduced vibration compared to simpler arrangements, while the two-stage thermodynamic layout ensures efficient heat removal through dedicated intercooling. Each compression stage is engineered with reinforced cylinder walls, high-pressure valve systems, and specialized sealing technology to withstand the mechanical stresses of ultra-high-pressure operation. The massive cast-iron frame and precision-forged crankshaft are rated for a minimum service life of 120,000시간 under rigorous maintenance protocols.

Technical Specifications – DW-60/30

* 모든 사양은 표준 참조 조건(ISO 1217, 부록 C)에서 측정되었습니다. 실제 성능은 현장 고도, 주변 온도 및 흡입구 조건에 따라 달라질 수 있습니다.

주요 특징 및 엔지니어링 장점

1. Ultra-High-Pressure Oil-Free PTFE Sealing System

The DW-60/30 employs a proprietary 자가 윤활 피스톤 링 및 라이더 밴드 어셈블리 manufactured from ultra-high-performance PTFE composites specifically engineered for 3.00 MPa service. These rings are reinforced with high-density glass fiber and bronze particulates to achieve a coefficient of friction below 0.05 without any external hydrocarbon lubrication. At 3.00 MPa discharge pressure, the partial pressure of oil vapor would be approximately 30 times higher than at 0.30 MPa, making oil contamination both more likely and more difficult to remove. The DW-60/30’s native oil-free design achieves ISO 8573-1 Class 0 compliance without any downstream filtration—a technical achievement that is unmatched by oil-lubricated alternatives in this pressure class. The PTFE formulation is rated for continuous operation at temperatures up to 190°C, ensuring reliable sealing integrity under the extreme thermal stress of ultra-high-pressure compression.

2. Four-Row Force-Balanced Architecture

그만큼 two-stage, four-row (二列四级) design of the DW-60/30 is a mechanical masterpiece that distributes the massive gas forces across four cylinders arranged in two opposed rows. This configuration provides near-complete cancellation of first-order and second-order inertial forces, reducing vibration transmission to the foundation by over 90% compared to single-row designs. The four-row arrangement also allows for smaller individual cylinders, reducing the peak gas forces on each piston and crankpin, which extends bearing life and reduces maintenance requirements. At 17.00 tonnes, the DW-60/30 is a substantial machine, but its vibration characteristics are comparable to much smaller compressors thanks to this advanced force-balancing design.

3. Reinforced High-Pressure Cylinder Construction

The high-pressure cylinders of the DW-60/30 are cast from GG30 gray cast iron (equivalent to ASTM A48 Class 35B) with wall thicknesses approximately 40% greater than standard cylinders, and feature extensive external ribbing to withstand the hoop stresses generated at 3.00 MPa peak pressure. The cylinder heads are secured with high-strength alloy steel studs torqued to precise specifications, and the head gaskets are multi-layer stainless steel with graphite coating to ensure leak-tight sealing under extreme pressure and thermal cycling. The cooling water jackets are machined with enhanced flow patterns to ensure adequate heat removal from the thick cylinder walls, preventing thermal gradients that could cause distortion or cracking.

4. Medium-Voltage Drive for Industrial-Scale Power

The DW-60/30 is driven by a 710 kW medium-voltage induction motor available in either 6kV or 10kV configurations, conforming to IEC 60034-1 efficiency class IE3. At this power level, medium-voltage drive is not merely preferable but essential—a 380V motor would require approximately 1,200A of current, necessitating impractically large cables, massive switchgear, and excessive I²R losses. The medium-voltage configuration integrates directly into industrial power distribution systems, reducing electrical infrastructure costs and improving overall energy efficiency. The motor is equipped with a robust shaft coupling and vibration monitoring system to ensure reliable power transmission to the massive crankshaft assembly.

응용 시나리오

Ultra-High-Pressure Nitrogen Injection for Enhanced Oil Recovery

In oil and gas production, the DW-60/30 serves as a high-pressure nitrogen injection compressor for enhanced oil recovery (EOR) and miscible gas flooding operations. The 3.00 MPa discharge pressure is sufficient to inject nitrogen into reservoir formations at depths up to 2,000 meters, where the nitrogen displaces crude oil and improves recovery factors by 10–20%. The 60 m³/min capacity can serve multiple injection wells simultaneously through a centralized high-pressure distribution manifold. The oil-free design is critical in EOR applications because any oil contamination would alter the wettability of the reservoir rock, reducing displacement efficiency and potentially causing formation damage.

Chemical Synthesis & High-Pressure Reactor Inerting

In ammonia synthesis, methanol production, and other high-pressure chemical processes, the DW-60/30 nitrogen compressor provides ultra-high-pressure nitrogen for reactor startup purging, catalyst bed preservation, and emergency inerting. The 3.00 MPa discharge pressure matches or exceeds the operating pressures of many synthesis reactors, allowing direct nitrogen injection without intermediate boosting. The 60 m³/min capacity can purge large reactor volumes in minutes, reducing startup times and improving plant availability. The oil-free certification is mandatory for chemical synthesis because oil contamination would poison precious metal catalysts and contaminate product streams.

Gas Liquefaction & Cryogenic Storage Pressurization

In large-scale nitrogen liquefaction plants, the DW-60/30 compresses nitrogen to the high pressure required for Claude-cycle or Linde-cycle liquefaction. The 3.00 MPa pressure is typically the optimal pressure for maximizing liquefaction efficiency in medium-scale plants (500–2,000 tons/day). The 60 m³/min capacity aligns with the nitrogen throughput of commercial liquefaction trains. The oil-free design is essential because oil contamination would freeze in the cryogenic heat exchangers, causing blockages and requiring costly shutdowns for defrosting and cleaning.

Pipeline Pressure Testing & Commissioning

Natural gas pipelines, petrochemical process lines, and high-pressure storage vessels require hydrostatic and pneumatic pressure testing at 1.5 times their design pressure before commissioning. The DW-60/30 provides ultra-high-pressure nitrogen for pneumatic pressure testing of pipelines and vessels rated up to 2.00 MPa. Nitrogen is preferred over air for pressure testing because it eliminates the explosion risk associated with oxygen-containing atmospheres. The 60 m³/min capacity allows rapid pressurization of large-diameter pipelines, reducing testing time and accelerating project commissioning schedules. The oil-free design ensures that the test medium does not leave any hydrocarbon residue in the pipeline.

자재 및 시공

The DW-60/30 is constructed from premium materials selected for ultra-high-pressure nitrogen compatibility, extreme mechanical stress resistance, and extended operational life:

모든 압력 지지 부품은 다음 사항에 따라 엄격하게 설계 및 제작됩니다. ASME BPVC 섹션 VIII 부문 1 or Chinese GB 150 standards. Every weld joint undergoes 100% radiographic inspection (RT) per ASME Section V, Article 2, and each completed pressure vessel is subjected to a hydrostatic pressure test at 1.5 times the maximum allowable working pressure (MAWP) for a minimum hold period of 30 minutes. High-pressure piping systems are fabricated from seamless SS316 with ANSI Class 900 flanged connections to ensure leak-tight integrity at 3.00 MPa operating pressure.

설치 및 유지 관리 지침

기초 및 구조 요구사항

The DW-60/30 has a dry weight of 17.00 tonnes and a center of gravity approximately 1,000 mm above the baseplate. Despite the massive size, the four-row opposed-cylinder design minimizes unbalanced forces, permitting installation on a reinforced concrete inertia block of 30–35 tonnes. The block must be mounted on heavy-duty vibration isolators (natural frequency 4–6 Hz) to prevent vibration transmission to adjacent structures. The foundation must be engineered by a qualified structural engineer to support the static weight plus dynamic forces during startup and operation. Minimum clearance requirements: 2.0 m on the non-drive side for valve access, 1.5 m on the drive side for motor maintenance, and 2.5 m overhead for crane access during major overhauls. The high-pressure discharge piping must be professionally engineered with proper supports, anchors, and expansion joints to manage thermal expansion and vibration at 3.00 MPa.

냉각수 시스템 설계

냉각수 수요는 대략 다음과 같습니다. 85 m³/h at an inlet temperature not exceeding 32°C. The water distribution circuit supplies the cylinder jackets, intercooler, and aftercooler in parallel with independent flow control valves. Given the extreme pressure ratio, the intercooler is absolutely critical for thermal management and must receive priority cooling water flow. Water quality specifications: pH 6.5–8.5, total dissolved solids < 400 mg/L, chloride content < 40 mg/L (to prevent SS316 tube corrosion), suspended solids < 20 mg/L, and total hardness < 250 mg/L as CaCO₃. A dedicated closed-loop cooling tower with full-stream filtration and automated chemical treatment is mandatory for reliable operation. The cooling water system must include redundant pumps and emergency backup power to prevent compressor shutdown due to cooling water failure.

예방 정비 일정

The oil-free design of the DW-60/30 eliminates the extensive maintenance associated with lubricated compressors of this size. There are no oil changes (which would require 400–600 liters per change), no oil analysis laboratory costs, no filter element replacements, and no oil separator cartridge changes. The primary consumable wear items are the PTFE 피스톤 링 및 라이더 밴드, which typically achieve 3,000–5,000 hours of service life under clean nitrogen conditions at ultra-high pressure. The four-row design distributes wear evenly across all cylinders, preventing the localized wear patterns that can occur in single-row compressors.

규정 준수 및 안전 인증

The DW-60/30 nitrogen compressor is designed, manufactured, and tested to meet or exceed the following international standards and regulatory frameworks:

성과 및 효율성 분석

The DW-60/30 achieves a specific power consumption of approximately 11.83 kW per m³/min of nitrogen delivered at 3.00 MPa discharge pressure. This specific power figure reflects the substantial thermodynamic work required for ultra-high-pressure compression. Within the ultra-high-pressure oil-free compressor segment (discharge pressure >2.50 MPa), this efficiency is competitive and typically superior to diaphragm compressors, which are the primary alternative for oil-free service at this pressure level. For comparison, a diaphragm compressor delivering equivalent capacity at 3.00 MPa would consume 18–25 kW/m³/min and cost 4–6 times more in capital expenditure.

Over an 8,000-hour annual operating schedule, the DW-60/30’s efficiency advantage versus diaphragm alternatives yields approximately 2,400,000–5,200,000 kWh of annual energy savings. At $0.08/kWh, this represents $192,000–$416,000 in direct electricity cost reduction per year. However, the primary economic justification for the DW-60/30 is typically the combination of massive capacity, ultra-high pressure, and oil-free operation in a single integrated machine, eliminating the need for multiple smaller compressors in series or parallel arrangements. The total cost of ownership for ultra-high-pressure nitrogen compression is reduced by an estimated 35–50% over a 10-year operational life when compared to multi-unit or diaphragm-based systems.

The absence of oil in the compression path is particularly critical at 3.00 MPa because oil contamination would be both more concentrated and more difficult to remove than at lower pressures. At 3.00 MPa, the partial pressure of oil vapor is approximately 100 times higher than at 0.30 MPa, making even trace oil carryover a serious contamination event. The DW-60/30’s native oil-free design eliminates this risk entirely, ensuring nitrogen purity regardless of operating pressure.

맞춤 제작 및 OEM 역량

We offer extensive customization options to adapt the DW-60/30 to specific site conditions, integration requirements, and end-user specifications:

• 스키드 장착형 턴키 패키지: The compressor, motor, coolers, instrumentation, and control panel are pre-assembled on a massive structural steel skid with integrated lifting lugs and anchor bolt templates. Factory pre-testing of all systems reduces commissioning time and risk.
• 위험 지역 구성: ATEX Zone 2 and IECEx compliant motor and electrical enclosures for petrochemical and oil & gas installations. Integrated gas detection, fire suppression, and automatic ventilation interlocks.
• 고급 공정 제어: Siemens S7-1500 or Allen-Bradley ControlLogix PLC with 15-inch HMI touchscreen, redundant controllers, remote monitoring via OPC-UA, and seamless DCS/SCADA integration. Automatic load control, anti-surge protection, and emergency shutdown systems.
• 환경 보호: C5-M marine-grade coatings for coastal installations; tropicalized electrical components for 55°C ambient; IP54-rated acoustic enclosures with noise reduction from 88 dB(A) to 75 dB(A) at 1 meter.
• OEM 및 자체 브랜드: Custom paint colors, branded nameplates, and localized documentation packages for major gas equipment distributors and EPC contractors.

사용자 지정 구성은 다음에서 이용 가능합니다. 최소 주문 수량 1개. Engineering review and proposal generation typically require 7–10 business days due to the complexity of ultra-high-pressure systems. Standard delivery time is 16–20 weeks; expedited delivery within 14 weeks is available for qualifying orders with advance material commitments.

Case Study: Ammonia Plant Nitrogen Purge & Startup System

고객: A large ammonia synthesis plant in the Middle East with a capacity of 2,000 metric tons per day

도전: The plant required a reliable ultra-high-pressure nitrogen supply for reactor startup purging, catalyst bed preservation during shutdowns, and emergency inerting of the synthesis loop. The existing system used three oil-lubricated compressors in series (low-pressure, medium-pressure, high-pressure) to achieve the required 3.00 MPa, with extensive oil-filtration equipment between stages. This arrangement was complex, maintenance-intensive, and experienced frequent oil contamination events that poisoned the iron-based synthesis catalyst, requiring costly catalyst replacement every 3–4 years instead of the designed 6–7 year life.

해결책: We supplied a DW-60/30 oil-free nitrogen compressor as a single-machine replacement for the entire three-compressor train, configured on a custom skid with integrated intercooler, aftercooler, and a redundant Siemens S7-1500 PLC control system with SCADA integration. The 3.00 MPa discharge pressure matched the synthesis loop operating pressure, allowing direct nitrogen injection without intermediate boosting. The 60 m³/min capacity could purge the entire synthesis loop (volume ~500 m³) in under 10 minutes, reducing startup time from 4 hours to 1.5 hours.

Quantified Results After 36 Months:

• Catalyst life: Extended from 3.5 years to 6.8 years, saving $2.4 million per catalyst replacement cycle
• Startup time: Reduced from 4 hours to 1.5 hours, generating additional production worth $180,000 per startup
• Maintenance costs: Reduced by 55% ($145,000/year to $65,000/year) through elimination of three-compressor train complexity
• Oil contamination events: 영 since commissioning, versus 4–6 events per year previously
• Floor space: Reduced by 60% through replacement of three compressors with one integrated unit
• 투자회수기간: 1.2 years based on catalyst life extension and maintenance savings alone

“The DW-60/30 has transformed our nitrogen system from a maintenance nightmare into a reliable utility. The catalyst life extension alone has paid for the machine, and our startup times have been cut by more than half. The oil-free design gives us complete confidence that our catalyst is protected.” — Chief Operations Officer, Ammonia Synthesis Plant

자주 묻는 질문 및 선택 가이드

관련 제품 및 솔루션

저희에 대한 포괄적인 개요를 보시려면 산업용 질소 압축기 오일프리 산소 압축기, 수소 압축기, 이산화탄소 압축기 및 맞춤형 특수 가스 솔루션을 포함한 당사 제품 포트폴리오에 대한 자세한 내용은 애플리케이션 엔지니어링 팀에 문의하거나 온라인 제품 카탈로그를 참조하십시오.

Ready to Transform Your Ultra-High-Pressure Nitrogen System?

Our senior application engineers are standing by to evaluate your nitrogen flow requirements, inlet conditions, discharge pressure targets, and integration constraints. We provide complimentary technical proposals, foundation engineering reviews, piping and instrumentation diagrams (P&IDs), and detailed total cost of ownership (TCO) analyses within 72 hours of receiving your inquiry.

이메일: [email protected] 24시간 이내 답변드리겠습니다.