Penerangan Produk
Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Is widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.
Advantage:
1.The third generation of advanced rotor and concise intake control system
2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life .
3. Efficient, low noise suction fan of the full use of export dynamic pressure
increased effect of heat transfer (air-cooled)
4. Automatic water-cooling system for large air compressor to provide more efficient.
5.Fault diagnosis system, the control panel is easy to operate
6 Removable door, equipment maintenance, service convenient
7.Microelectronic processing so that temperature,pressure and other parameters are closely monitored .
Our SEF Product details:
Product accessories:
1.Brand Screw Host
Large rotors,low rpm,long life span
High efficiency,low noise,low vibration,high reliability
Bearing life over 100,000 hours
Little leakage triangle,low power/airflow ratio
Less wearing parts,low maintenance cost
2.Motor
High efficiency air-cooling totally enclosed motor
Large starting torque
Low noise,better structure
Original imported CHINAMFG bearing
F grade insulation,IP 55 protection level
Low rpm
3.Brand Intake Valve Assembie
Non-load starting,butterfly inlet comtrolling valve
0~100% stepless volume regulation,aluminium alloy unibody casing
With Non-return value for heavy load,piston mover
Non-return value close under urgent stop or power failure
4.Air Filter
Air filter from Mann Hummel Germany
Dust removal 99.9%,filtering fineness 3 μm
Ensuring the clean air for inlet
Prolonging the life span of air system,large size,over 3000 hours
5.Oil System
Oil Filter from Mann Hummel Germany
Reliably removing the dust in oil
Oil fineness less then 0.1 μm
Ensuring the clearness and lubrication of oil system,good cooling function
Aplication Fields:
Our service:
1. Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments. 1. Select equipment model. 2. Design and manufacture products according to client’s special requirement; 3. Train technical personnel for clients.
2. Services during the sale:
1. Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
3. After-sale services:
Provide considerate services to minimize clients’ worries.
1. Complete After-sales service, professional engineers available to service machinery at home or oversea.
2.24 hours technical support by e-mail.
3. Other essential technological service.
| Gaya Pelinciran: | Dilincirkan |
|---|---|
| Sistem Penyejukan: | Penyejukan Udara |
| Sumber Kuasa: | Kuasa AC |
| Kedudukan Silinder: | Horizontal |
| Jenis Struktur: | Jenis Tertutup |
| Installation Type: | Stationary Type |
| Penyesuaian: |
Tersedia
|
|
|---|
.webp)
What are the advantages of using rotary vane compressors?
Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:
1. Compact and Lightweight:
Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.
2. High Efficiency:
Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.
3. Quiet Operation:
Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.
4. Oil Lubrication:
Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.
5. Versatile Applications:
Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.
6. Easy Maintenance:
Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.
These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.
.webp)
Are there differences between single-stage and two-stage air compressors?
Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:
Compression Stages:
The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.
Compression Process:
In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.
Pressure Output:
The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.
Efficiency:
Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.
Intercooling:
Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.
Applications:
The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.
It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.
In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.
.webp)
Apakah peranan tangki pemampat udara?
Tangki pemampat udara, juga dikenali sebagai tangki penerima atau penerima udara, memainkan peranan penting dalam operasi sistem pemampat udara. Ia memainkan beberapa fungsi penting:
1. Peraturan Penyimpanan dan Tekanan: Peranan utama tangki pemampat udara adalah untuk menyimpan udara termampat. Apabila pemampat mengepam udara ke dalam tangki, ia akan terkumpul dan memberi tekanan kepada udara. Tangki bertindak sebagai takungan, membolehkan pemampat beroperasi secara berselang-seli sambil menyediakan bekalan udara termampat yang stabil semasa tempoh permintaan yang tinggi. Ia membantu mengawal selia dan menstabilkan tekanan dalam sistem, mengurangkan turun naik tekanan dan memastikan bekalan udara yang konsisten.
2. Pemeluwapan dan Pemisahan Lembapan: Udara termampat mengandungi kelembapan, yang boleh terkondensasi apabila udara menyejuk di dalam tangki. Tangki pemampat udara dilengkapi dengan pemisah kelembapan atau injap longkang untuk mengumpul dan mengeluarkan kelembapan terkondensasi ini. Tangki ini menyediakan ruang untuk kelembapan mendap, membolehkannya disalirkan keluar secara berkala. Ini membantu mencegah masalah berkaitan kelembapan seperti kakisan, pencemaran dan kerosakan pada peralatan hiliran.
3. Pelesapan Haba: Semasa pemampatan, suhu udara meningkat. Tangki pemampat udara menyediakan luas permukaan yang lebih besar untuk udara termampat menyejukkan dan menghilangkan haba. Ini membantu mencegah pemampat daripada terlalu panas dan memastikan operasi yang cekap.
4. Pengurangan Lonjakan Tekanan: Tangki pemampat udara bertindak sebagai penampan untuk menyerap lonjakan tekanan atau denyutan yang mungkin berlaku semasa operasi pemampat. Lonjakan ini boleh disebabkan oleh variasi permintaan, perubahan aliran udara secara tiba-tiba, atau sifat kitaran pemampat salingan. Tangki menyerap turun naik tekanan ini, mengurangkan tekanan pada pemampat dan komponen lain, dan menyediakan bekalan udara termampat yang lebih stabil dan konsisten.
5. Kecekapan Tenaga: Tangki pemampat udara menyumbang kepada kecekapan tenaga dengan mengurangkan keperluan pemampat untuk berjalan secara berterusan. Pemampat boleh mengisi tangki semasa tempoh permintaan rendah dan kemudian dimatikan apabila tekanan yang dikehendaki dicapai. Ini membolehkan pemampat beroperasi dalam kitaran yang lebih pendek, mengurangkan penggunaan tenaga dan meminimumkan haus dan lusuh pada motor pemampat.
6. Bekalan Udara Kecemasan: Sekiranya berlaku gangguan bekalan elektrik atau kegagalan pemampat, udara termampat yang disimpan di dalam tangki boleh berfungsi sebagai bekalan udara kecemasan. Ini boleh menyediakan udara sementara untuk operasi kritikal, membolehkan masa untuk penyelenggaraan atau pembaikan dijalankan tanpa mengganggu keseluruhan aliran kerja.
Secara keseluruhan, tangki pemampat udara menyediakan penyimpanan, pengawalaturan tekanan, pemisahan kelembapan, pelesapan haba, pengurangan lonjakan tekanan, kecekapan tenaga dan keupayaan sandaran kecemasan. Ia merupakan komponen penting yang meningkatkan prestasi, kebolehpercayaan dan jangka hayat sistem pemampat udara dalam pelbagai aplikasi perindustrian, komersial dan peribadi.
editor by CX 2023-10-08
