Descrizione del prodotto
Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Is widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.
Advantage:
1.The third generation of advanced rotor and concise intake control system
2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life .
3. Efficient, low noise suction fan of the full use of export dynamic pressure
increased effect of heat transfer (air-cooled)
4. Automatic water-cooling system for large air compressor to provide more efficient.
5.Fault diagnosis system, the control panel is easy to operate
6 Removable door, equipment maintenance, service convenient
7.Microelectronic processing so that temperature,pressure and other parameters are closely monitored .
Our SEF Product details:
Product accessories:
1.Brand Screw Host
Large rotors,low rpm,long life span
High efficiency,low noise,low vibration,high reliability
Bearing life over 100,000 hours
Little leakage triangle,low power/airflow ratio
Less wearing parts,low maintenance cost
2.Motor
High efficiency air-cooling totally enclosed motor
Large starting torque
Low noise,better structure
Original imported CHINAMFG bearing
F grade insulation,IP 55 protection level
Low rpm
3.Brand Intake Valve Assembie
Non-load starting,butterfly inlet comtrolling valve
0~100% stepless volume regulation,aluminium alloy unibody casing
With Non-return value for heavy load,piston mover
Non-return value close under urgent stop or power failure
4.Air Filter
Air filter from Mann Hummel Germany
Dust removal 99.9%,filtering fineness 3 μm
Ensuring the clean air for inlet
Prolonging the life span of air system,large size,over 3000 hours
5.Oil System
Oil Filter from Mann Hummel Germany
Reliably removing the dust in oil
Oil fineness less then 0.1 μm
Ensuring the clearness and lubrication of oil system,good cooling function
Aplication Fields:
Il nostro servizio:
1. Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments. 1. Select equipment model. 2. Design and manufacture products according to client’s special requirement; 3. Train technical personnel for clients.
2. Services during the sale:
1. Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
3. After-sale services:
Provide considerate services to minimize clients’ worries.
1. Complete After-sales service, professional engineers available to service machinery at home or oversea.
2.24 hours technical support by e-mail.
3. Other essential technological service.
| Stile di lubrificazione: | Lubrificato |
|---|---|
| Sistema di raffreddamento: | Raffreddamento ad aria |
| Fonte di alimentazione: | Alimentazione CA |
| Posizione del cilindro: | Orizzontale |
| Tipo di struttura: | Tipo chiuso |
| Tipo di installazione: | Tipo fisso |
| Personalizzazione: |
Disponibile
|
|
|---|
.webp)
What are the advantages of using rotary vane compressors?
Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:
1. Compact and Lightweight:
Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.
2. High Efficiency:
Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.
3. Quiet Operation:
Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.
4. Oil Lubrication:
Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.
5. Versatile Applications:
Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.
6. Easy Maintenance:
Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.
These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.
.webp)
Esistono differenze tra compressori d'aria monostadio e bistadio?
Sì, ci sono differenze tra i compressori d'aria monostadio e quelli bistadio. Ecco una spiegazione dettagliata delle loro distinzioni:
Fasi di compressione:
La differenza principale tra i compressori d'aria monostadio e quelli bistadio risiede nel numero di stadi di compressione. Un compressore monostadio ha un solo stadio di compressione, mentre un compressore bistadio ne ha due in sequenza.
Processo di compressione:
In un compressore monostadio, l'intero processo di compressione avviene in un unico cilindro. L'aria viene aspirata nel cilindro, compressa in un'unica fase e quindi scaricata. Un compressore bistadio, invece, utilizza due cilindri o camere. Nel primo stadio, l'aria viene compressa a una pressione intermedia nel primo cilindro. Successivamente, l'aria parzialmente compressa viene inviata al secondo cilindro dove subisce un'ulteriore compressione per raggiungere la pressione finale desiderata.
Pressione in uscita:
Il numero di stadi di compressione influisce direttamente sulla pressione erogata dal compressore d'aria. I compressori monostadio in genere forniscono livelli di pressione massima inferiori rispetto ai compressori bistadio. I compressori monostadio sono adatti per applicazioni che richiedono una pressione dell'aria da moderata a bassa, mentre i compressori bistadio sono in grado di erogare pressioni più elevate, risultando quindi adatti ad applicazioni più impegnative che richiedono una pressione dell'aria maggiore.
Efficienza:
I compressori a due stadi offrono generalmente un'efficienza maggiore rispetto ai compressori a stadio singolo. Il processo di compressione a due stadi consente una migliore dissipazione del calore tra gli stadi, riducendo il rischio di surriscaldamento e migliorando l'efficienza complessiva. Inoltre, la configurazione a due stadi permette al compressore di raggiungere rapporti di compressione più elevati, minimizzando al contempo il lavoro svolto da ciascuno stadio, con conseguente miglioramento dell'efficienza energetica.
Intercooling:
L'intercooling è una caratteristica specifica dei compressori a due stadi. Gli intercooler sono scambiatori di calore posizionati tra il primo e il secondo stadio di compressione. Raffreddano l'aria parzialmente compressa prima che entri nel secondo stadio, riducendone la temperatura e migliorando l'efficienza di compressione. Il processo di intercooling contribuisce a minimizzare l'accumulo di calore e a ridurre il rischio di condensa all'interno del sistema di compressione.
Applicazioni:
La scelta tra un compressore monostadio e un compressore bistadio dipende dall'applicazione prevista. I compressori monostadio sono comunemente utilizzati per applicazioni leggere, come l'alimentazione di utensili pneumatici, piccole officine e progetti fai-da-te. I compressori bistadio sono più adatti per applicazioni gravose che richiedono pressioni più elevate, come la produzione industriale, l'assistenza automobilistica e le grandi costruzioni.
Quando si sceglie tra un compressore d'aria monostadio e uno bistadio, è importante considerare i requisiti specifici dell'applicazione, inclusi i livelli di pressione richiesti, il ciclo di lavoro e la domanda d'aria prevista.
In sintesi, le principali differenze tra i compressori d'aria monostadio e bistadio risiedono nel numero di stadi di compressione, nella pressione di uscita, nell'efficienza, nella capacità di interrefrigerazione e nell'idoneità all'applicazione.
.webp)
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2023-10-08
