LW-9.5/30 Nitrogen Compressor – Oil-Free N2 Booster for 3.00 MPa High-Pressure Process Applications

Engineered to deliver 9.5 m³/min at 3.00 MPa discharge pressure, the LW-9.5/30 is a two-stage, three-row oil-free piston nitrogen compressor designed for high-pressure nitrogen injection, gas liquefaction booster duty, and demanding petrochemical process applications. Zero oil contamination, continuous-duty rated, and built for 24/7 industrial reliability at elevated pressure.

Өнімге шолу

The LW-9.5/30 nitrogen compressor occupies a critical position in our oil-free piston compressor lineup, engineered specifically for applications demanding both substantial flow capacity and high discharge pressure. With a rated capacity of 9.5 m³/min және ерекше 3.00 MPa discharge pressure, this unit addresses the most demanding high-pressure nitrogen boosting requirements in industrial gas processing, chemical synthesis, and petrochemical operations.

What distinguishes the LW-9.5/30 from conventional alternatives is its толығымен майсыз сығымдау жолы. The piston rings and rider bands are precision-machined from advanced self-lubricating PTFE composite materials that operate without any hydrocarbon lubricants. This intrinsic oil-free characteristic ensures the nitrogen product stream remains completely uncontaminated, achieving ISO 8573-1 0-сыныпты сертификаттау natively. At 3.00 MPa discharge pressure, the risk of oil vapor carryover is magnified compared to low-pressure applications, making the oil-free design not merely advantageous but absolutely essential for process integrity.

Компрессор архитектурасы мынаны пайдаланады two-stage, three-row (二列三级) configuration that optimally distributes the substantial pressure ratio across multiple compression stages. This multi-stage approach is thermodynamically essential for managing the thermal loads associated with 3.00 MPa discharge pressure while preserving the integrity of the PTFE sealing elements. Each stage features an independent intercooler, ensuring gas temperatures remain within safe operating envelopes even during sustained maximum-capacity operation. The robust cast-iron frame and dynamically balanced forged steel crankshaft are rated for a minimum service life of 120 000 сағат стандартты техникалық қызмет көрсету хаттамалары бойынша.

Technical Specifications – LW-9.5/30

* Барлық сипаттамалар стандартты анықтамалық шарттар бойынша бағаланған (ISO 1217, C қосымшасы). Нақты көрсеткіштер алаңның биіктігіне, қоршаған орта температурасына және кіріс жағдайларына байланысты өзгеруі мүмкін.

Негізгі ерекшеліктері және инженерлік артықшылықтары

1. Multi-Stage Compression for Extreme Pressure Ratios

The two-stage, three-row (二列三级) architecture of the LW-9.5/30 is thermodynamically essential for achieving the 3.00 MPa discharge pressure target from typical inlet pressures of 0.05–0.10 MPa. The overall pressure ratio of approximately 30:1 to 60:1 is distributed across three compression rows with two inter-stage cooling points. This multi-stage approach limits the discharge temperature of each stage to below 160°C, preventing thermal degradation of the PTFE sealing elements and extending valve plate life by approximately 50% compared to two-stage designs operating at equivalent overall pressure ratios. The three-row configuration also provides superior force balance characteristics, reducing vibration transmission to the foundation.

2. High-Pressure Oil-Free PTFE Composite Sealing

The LW-9.5/30 employs a proprietary өздігінен майланатын поршень сақинасы және шабандоздық таспа жинағы manufactured from high-density PTFE composites specifically formulated for high-pressure service. These rings are reinforced with glass fiber and bronze particulates to achieve a coefficient of friction below 0.06 without any external hydrocarbon lubrication. At 3.00 MPa discharge pressure, the partial pressure of oil vapor would be approximately 10 times higher than at 0.30 MPa, making oil contamination exponentially more difficult to remove downstream. The LW-9.5/30’s native oil-free design eliminates this challenge entirely, delivering ISO 8573-1 0-сыныпты сертификаттау without any downstream filtration equipment. The PTFE formulation is rated for continuous operation at temperatures up to 185°C, ensuring reliable sealing integrity under the thermal stress of ultra-high-pressure compression.

3. Reinforced Frame Construction for High-Pressure Loads

Негізгі рамка құйылған GG25 сұр шойын (equivalent to ASTM A48 Class 30B) with substantially reinforced wall sections and integral cooling water passages. The high-pressure cylinder features thickened wall castings, additional external ribbing, and stress-relief grooves to withstand the mechanical stresses associated with 3.00 MPa peak pressures. The three-row configuration provides superior inertial force distribution compared to two-row designs, with the additional row contributing to smoother torque delivery and reduced torsional vibration in the crankshaft. This mechanical refinement is particularly valuable for high-pressure compressors where the peak gas forces on the pistons are substantially elevated.

4. Standard 380V Industrial Motor Drive

The LW-9.5/30 is driven by a 110 kW, 380V, 50Hz three-phase induction motor conforming to IEC 60034-1 efficiency class IE3. The standard low-voltage configuration integrates directly into existing 380V industrial distribution panels without requiring medium-voltage switchgear or step-down transformers. This electrical simplicity reduces both capital expenditure and commissioning complexity, making the unit accessible to a wide range of industrial facilities. For sites with 6kV or 10kV bus systems, an optional motor with integrated step-down transformer can be supplied on a common skid.

Қолдану сценарийлері

High-Pressure Nitrogen Injection for Chemical Synthesis

In chemical process plants, the LW-9.5/30 provides high-pressure nitrogen for ammonia synthesis loop purging, urea reactor inerting, and methanol synthesis catalyst preservation. The 3.00 MPa discharge pressure is sufficient to inject nitrogen directly into high-pressure chemical reactors operating at 2.0–2.5 MPa, maintaining positive inert gas blankets during all phases of operation. The oil-free design is absolutely critical in chemical synthesis applications because any hydrocarbon contamination would poison precious metal catalysts, degrade product quality, and potentially create hazardous conditions in exothermic reactions.

Gas Liquefaction & Cryogenic Storage Booster

In nitrogen liquefaction plants and cryogenic storage facilities, the LW-9.5/30 nitrogen booster compresses nitrogen from the liquefier vaporizer or storage tank to the pressure required for distribution, further processing, or transfer to high-pressure storage vessels. The 3.00 MPa discharge pressure is sufficient for feeding nitrogen into cryogenic liquid storage systems, driving nitrogen through high-pressure heat exchangers, and supplying nitrogen to process equipment requiring elevated pressure. The oil-free design prevents contamination of cryogenic equipment and ensures that liquefied nitrogen product meets the stringent purity requirements of food-grade, medical-grade, and electronics-grade applications.

Petrochemical High-Pressure Vessel Inerting & Testing

In petrochemical and refinery operations, the LW-9.5/30 provides high-pressure nitrogen for reactor catalyst preservation, emergency nitrogen injection into high-pressure vessels, hydrostatic testing of process piping, and pipeline pressure testing. The 3.00 MPa discharge pressure is sufficient to inject nitrogen into process vessels operating at pressures up to 2.5 MPa, maintaining positive inert gas blankets during startup, shutdown, and upset conditions. The oil-free certification is mandatory for petrochemical applications where nitrogen contacts catalyst beds or enters process streams that must remain completely hydrocarbon-free.

Supercritical Fluid Extraction & Processing

In food processing, pharmaceutical manufacturing, and specialty chemical production, supercritical nitrogen is used for extraction of active compounds, particle formation, and precision cleaning of sensitive components. The critical point of nitrogen is 3.39 MPa and -147°C, meaning the LW-9.5/30’s 3.00 MPa discharge pressure brings nitrogen very close to supercritical conditions when combined with moderate cooling. This near-supercritical nitrogen is used for extracting caffeine from coffee, decaffeinating tea, extracting essential oils, and cleaning precision optical components. The oil-free design is non-negotiable in these applications because any hydrocarbon contamination would be extracted along with the target compounds, compromising product purity and safety.

Материал және құрылыс

The LW-9.5/30 is constructed from premium materials selected for ultra-high-pressure nitrogen compatibility, thermal resistance, and extended operational life:

Барлық қысым көтеретін компоненттер қатаң түрде жобаланған және жасалған ASME BPVC VIII бөлім 1-бөлім or Chinese GB 150 standards. Every weld joint undergoes 100% radiographic inspection (RT) per ASME Section V, Article 2, and each completed pressure vessel is subjected to a hydrostatic pressure test at 1.5 times the maximum allowable working pressure (MAWP) for a minimum hold period of 30 minutes. High-pressure piping systems are fabricated from seamless SS316 with ANSI Class 900 flanged connections to ensure leak-tight integrity at 3.00 MPa operating pressure.

Орнату және техникалық қызмет көрсету нұсқаулары

Іргетас және құрылымдық талаптар

The LW-9.5/30 has a dry weight of 3.70 tonnes and a center of gravity approximately 850 mm above the baseplate. Due to the three-row configuration, the unbalanced forces are well-distributed, permitting installation on a 6–8 тонналық темірбетон инерциялық блогы. The block should be mounted on elastomeric vibration isolators (natural frequency 7–10 Hz). Minimum clearance requirements: 1.2 m on the non-drive side for valve access, 1.0 m on the drive side for motor maintenance, and 1.8 m overhead for crane access. Special attention must be paid to the high-pressure discharge piping, which must be properly supported, anchored, and stress-relieved to prevent vibration-induced fatigue at 3.00 MPa.

Салқындату су жүйесін жобалау

Салқындатқыш суға қажеттілік шамамен 22 m³/h at an inlet temperature not exceeding 32°C. The water distribution circuit supplies the cylinder jackets and two intercoolers in parallel. Given the extreme pressure ratio, the intercoolers are absolutely critical for thermal management and must receive priority cooling water flow at all times. Water quality specifications: pH 6.5–8.5, total dissolved solids < 500 mg/L, chloride content < 50 mg/L (to prevent SS316 tube corrosion), suspended solids < 30 mg/L, and total hardness < 300 mg/L as CaCO₃. A closed-loop cooling tower with side-stream filtration and chemical treatment is strongly recommended for sites with marginal water quality.

Алдын алу жұмыстарының кестесі

The oil-free design of the LW-9.5/30 dramatically simplifies maintenance compared to lubricated alternatives. There are no oil changes, no oil analysis, no filter replacements, and no separator cartridge changes. The primary consumable wear items are the PTFE поршень сақиналары және рульдік белдіктер, which typically achieve 3,000–5,000 hours of service life under clean nitrogen conditions at high pressure. The high-pressure valve plates on the third stage may require more frequent inspection due to the extreme mechanical stress at 3.00 MPa, but the overall maintenance burden remains significantly lower than oil-lubricated systems.

Сәйкестік және қауіпсіздік сертификаттары

The LW-9.5/30 nitrogen compressor is designed, manufactured, and tested to meet or exceed the following international standards and regulatory frameworks:

Өнімділік және тиімділік талдауы

The LW-9.5/30 achieves a specific power consumption of approximately 11.58 kW per m³/min of nitrogen delivered at 3.00 MPa discharge pressure. This specific power figure reflects the thermodynamic reality of ultra-high-pressure compression, where the work required increases substantially with pressure ratio. Within the high-pressure oil-free piston compressor segment (discharge pressure >2.50 MPa), this efficiency is competitive and often superior to diaphragm compressors, which are the primary alternative for oil-free ultra-high-pressure service. For comparison, oil-lubricated reciprocating compressors in similar applications typically consume 12.0–14.0 kW/m³/min, while diaphragm compressors may exceed 18 kW/m³/min.

Over a standard 8,000-hour annual operating schedule, the LW-9.5/30’s efficiency advantage versus less efficient alternatives yields approximately 38,000–95,000 kWh of annual energy savings. At $0.08/kWh, this represents $3,040–$7,600 in direct electricity cost reduction per year. However, the primary economic justification for the LW-9.5/30 is typically the мұнайға қатысты шығын материалдарын алып тастау және мұнайды кетіруге арналған жабдықтарды пайдаланудан бас тарту that would be mandatory with lubricated alternatives. At 3.00 MPa, the partial pressure of oil vapor is approximately 10 times higher than at 0.30 MPa, making downstream oil removal exponentially more difficult and expensive. The аса жоғары қысымды азот компрессиясының жалпы меншік құны is reduced by an estimated 30–45% over a 10-year operational life when oil-free operation is compared to lubricated systems with full downstream purification.

The multi-stage design also contributes to efficiency by reducing the mean effective temperature and improving volumetric efficiency. The two inter-stage cooling points remove approximately 35% of the heat of compression, reducing the work required in subsequent stages and improving the overall isothermal efficiency of the compression process.

Теңшеу және OEM мүмкіндіктері

We offer comprehensive customization options to adapt the LW-9.5/30 to specific site conditions, integration requirements, and end-user specifications:

• Тасбақаға орнатылатын кілтпен толтырылатын пакеттер: Pre-assembled compressor, motor, dual intercoolers, aftercooler, high-pressure discharge piping, instrumentation, and control panel on a structural steel skid. All high-pressure joints are factory-tested to 1.5× MAWP before shipment. Reduces field installation to electrical and cooling water connections only.
• Қауіпті аймақ конфигурациялары: ATEX Zone 2 and IECEx compliant motor and electrical enclosures for petrochemical installations. Integrated gas detection, automatic ventilation interlocks, and emergency isolation valves incorporated into the control system.
• Кеңейтілген процесті басқару: Optional Siemens S7-1200 or Allen-Bradley CompactLogix PLC with 10-inch HMI touchscreen, remote monitoring via Modbus TCP/IP or OPC-UA, and seamless DCS/SCADA integration. High-pressure safety interlocks including automatic unload on overpressure, emergency isolation valves, and staged pressure relief.
• Қоршаған ортаны қорғау: Жағалаудағы қондырғыларға арналған C5-M теңіз деңгейіндегі жабындар; 55°C қоршаған ортаға арналған тропикалық электрлік компоненттер; IP54 рейтингі бар акустикалық қоршаулар шуды 1 метрде 85 дБ(А)-дан 72 дБ(А)-ға дейін төмендетеді.
• OEM және жеке жапсырма: Газ жабдықтарын дистрибьюторлар мен жүйелік интеграторларға арналған арнайы бояу түстері, брендтік атау тақтайшалары және жергілікті құжаттама.

Арнайы конфигурациялар мына жерден қолжетімді MOQ 1 бірлікИнженерлік ұсыныстар әдетте 5-7 жұмыс күні ішінде жеткізіледі. Стандартты жеткізу мерзімі - 12-14 апта; білікті тапсырыстар үшін 10 апта ішінде жеделдетілген жеткізу қолжетімді.

Case Study: Chemical Plant High-Pressure Nitrogen System Upgrade

Клиент: A fertilizer manufacturer in Indonesia operating ammonia and urea synthesis plants

Қиындық: The plant’s existing high-pressure nitrogen supply consisted of an oil-lubricated compressor (20 years in service) feeding the ammonia synthesis loop and urea reactor inerting systems. Oil contamination in the nitrogen stream had reached 2.8 mg/m³, causing progressive poisoning of the iron-based ammonia synthesis catalyst. Catalyst activity had declined by 15% over 18 months, reducing plant output and increasing energy consumption. The catalyst replacement cost was estimated at $450,000, and the plant faced a potential production shutdown.

Шешімі: Біз қамтамасыз еттік LW-9.5/30 oil-free nitrogen compressor as the primary high-pressure booster, configured on a custom skid with integrated dual intercoolers, aftercooler, and a Siemens S7-1200 PLC control panel with SCADA integration. The 3.00 MPa discharge pressure met all high-pressure inerting requirements, while the oil-free design eliminated catalyst poisoning. A 2 m³ surge vessel was installed upstream to buffer demand fluctuations from the batch-operated urea reactor inerting system.

Quantified Results After 24 Months:

• Азот майының құрамы: Reduced from 2.8 mg/m³ to <0.01 mg/m³, ISO 8573-1 0 класына қол жеткізу
• Ammonia synthesis catalyst activity: Stabilized, with no further decline observed
• Avoided catalyst replacement cost: $450,000 (deferred indefinitely)
• Plant output improvement: Restored to design capacity, increasing revenue by $2.1M/year
• Energy consumption: Improved by 5.2% versus the replaced unit, saving $12,800/year
• Жоспарланбаған үзіліс: Нөлдік оқиға in 24 months of continuous operation

“The LW-9.5/30 saved our ammonia plant from a catastrophic catalyst replacement and shutdown. The oil-free design has restored our catalyst activity and eliminated the contamination that was destroying our production. This compressor paid for itself in the first six months through avoided catalyst costs alone.” — Chief Engineer, Fertilizer Manufacturing Plant

Жиі қойылатын сұрақтар және таңдау бойынша нұсқаулық

Байланысты өнімдер мен шешімдер

Біздің жан-жақты шолуымыз үшін өнеркәсіптік азот компрессоры майсыз оттегі компрессорларын, сутегі компрессорларын, көмірқышқыл газы компрессорларын және арнайы жасалған арнайы газ шешімдерін қоса алғанда, портфолио үшін біздің қолданбалы инженерлік тобымызбен хабарласыңыз немесе онлайн өнім каталогымызды қараңыз.

Ультра жоғары қысымды азот жүйеңізді жаңартуға дайынсыз ба?

Біздің қолданба инженерлері сіздің азот ағынына қойылатын талаптарыңызды, сору жағдайларын, шығару қысымының мақсаттарын және интеграция шектеулерін бағалауға дайын. Біз сіздің сұранысыңызды алғаннан кейін 48 сағат ішінде тегін техникалық ұсыныстарды, іргетас орналасу сызбаларын, құбырлар мен бақылау-өлшеу құралдарының диаграммаларын (P&ID) және меншіктің жалпы құнын (TCO) егжей-тегжейлі талдауды ұсынамыз.

Электрондық пошта: [email protected] | 24 сағат ішінде жауап беру