Category Archives: Uncategorized

China Best Sales Double Stage 8 Bar Screw Air Compressor wholesaler

Product Description

Double stage 8 bar screw air compressor

Product description

Xihu (West Lake) Dis.nized man-machine interface display control system
• The operation is particularly convenient and simple, and the running status is clear at a glance.
• Can work for you 24 hours a day under unattended conditions.
• Once abnormal factors appear, maintenance or overhaul will be prompted in Chinese.
• Reserve output interface, which can realize chain control and remote diagnosis control of multiple units.
• Economical and easy to maintain, suitable for low-power hosts.
Low consumption and high efficiency motor
• High starting torque.
• Insulation class F, protection class IP23.
•Built-in refueling device, can refuel without stopping.
Efficient intake control valve
• NO/OFF control method.
• Anti-injection design with check valve.

Technical Parameters

Screw group	5: 6 Gear rotor
Compression method	Continuous, single stage
Compressed air outlet pressure	0.8MPa
Compressed air outlet temperature	Air-cooled
Compressed air outlet temperature	10ºC~15ºC higher than the ambient temperature
Volume of Lubricating Oil	About 7.5 liters
Motor speed	N=2930r/min
Rated power	75kw
Displacement	0.8MPa	13.0m³/min
Weight	1200kg
Upper air temperature	45ºC
Lower limit of air temperature	0ºC
Fuel consumption	Exhaust oil content is less than 3PPM
Noise level	72dB(A)
Dimensions (length×width×height) (mm)	1800x1190x1710

Product pictures
Built-in oil separation system The built-in oil separation design ensures the separation of oil and gas and reduces fuel consumption.

Certified Genuine Parts. CZPT Certified Genuine Parts to ensure the compressors delivered to you always perform at high performance.

Adhering to the basic belief in environmental sustainability, we have been committed to continuously improving the energy efficiency of our products and creating value for users.

Energy saving and economical, reliable and durable, environmentally friendly and quiet.

The Latest-Generation High Efficiency Screw Rotor! “Large Rotor, Low Speed”, Direct Drive;

The latest generation of high-efficiency rotor profiles, full-spectrum screw mainframe meets the national energy-saving standards.

Specification

Model	Working Pressure	Displacement	Motor Power	Exhaust interface	Weight	Noise	Dimension
	Bar	m³/min	kw		kg	dB(A)	mm
BK7.5-8G	8	1.2	7.5	G1	200	70	800620800
BK7.5-10	10	1	7.5	G3/4	200	72	7207001000
BK7.5-13	13	0.8	7.5	G3/4	200	72	7207001000
BK11-8G	8	1.7	11	G1	300	72	10006701090
BK11-10	10	1.5	11	G1	290	72	7006701250
BK11-13	13	1.2	11	G1	290	72	7006701250
BK15-8G	8	2.4	15	G1	280	73	10006701090
BK15-10	10	2.2	15	G1	290	73	7006701250
BK15-13	13	1.7	15	G1	290	73	7006701250
BK18-8	8	3	18.5	G1	500	74	10808801235
BK18-10	10	2.7	18.5	G1	500	74	10808801235
BK18-13	13	2.3	18.5	G1	500	74	10808801235
BK22-8ZG	8	3.6	22	G1	380	74	*12008001100*
BK22-10	10	3.2	22	G1	540	74	*10808801235*
BK22-13	13	2.7	22	G1	540	74	*10808801235*
BK30-8	8	5	30	G1 1/2	650	75	11209301290
BK30-10	10	4.4	30	G1 1/2	650	75	11209301290
BK30-13	13	3.6	30	G1 1/2	650	75	11209301290
BK37-8ZG	8	6	37	G1 1/2	740	76	15309001230
BK37-10	10	5.5	37	G1 1/2	730	76	124010301435
BK37-13	13	4.6	37	G1 1/2	730	76	124010301435
BK45-8G	8	7.1	45	G1 1/2	800	78	148010301345
BK45-10	10	6.5	45	G1 1/2	820	78	124010301595
BK45-13	13	5.6	45	G1 1/2	820	78	124010301595
BK55-8G	8	10	55	G1 1/2	800	80	148010301345
BK55-10	10	8.5	55	G1 1/2	1200	80	154512001470
BK55-13	13	7.4	55	G1 1/2	1200	80	154512001470

Company Information
Our Company–Worldwide Factories Make After-Sale Worry-free!
In 2009, CZPT established Jersey North American Research Center in Seattle in the United States, attracting many top-notch compressor experts from around the world and creating a new model that is aptly described as “developed in America, Made in China”
Kaishan is headquartered in HangZhou in ZHangZhoug, China. It has subsidiaries in ZheJiang , Chgonqing, ZheJiang , ZheJiang , Hong Kong, Seattle, San Diego, Orlando, Melbourne, Singapore, Jakarta, Leobersdorf, Budapest and Belgrade, as well as offices in Russia, Colombia, Brazil, Korea, Malaysia and Thailand.

Advanced Equipment–Advanced equipment guarantees product quality

Certifications

Global Customers–You are not alone!

Customer Cases

After-sales Service:	One Year Warranty
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

air-compressor

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Best Sales Double Stage 8 Bar Screw Air Compressor wholesaler
editor by CX 2023-04-19

China best Low Power Consumption 0.32kw Oxygen Compressor for Hospital and Home Air Pump portable air compressor

Product Description

Product Parameter

ITEM NO	GLE280A
Name	Oil free air compressor
Packing	2 pcs / carton case , 54 pcs / pallet
Weight	6.0 kg
Dimension	*235101163 mm*
Installation size	*83148 mm**
Air flow rate (L/min@bar)	>=75 L/min @2 bar
Technical Specification	Voltage :220V 50Hz /60Hz ; 110v 60Hz ; Power: <=320 W ; Rated air flow rate: >=75 L/min @2 bar ; Rate working pressure : 2 bar ; Restart pressure : 0 bar; Noise : ≤52dB(A) ; Speed: 1440rpm /1700 rpm ; Temperature : -5ºC-40ºC ; Thermal protector : 135ºC ; Insulation class: B Accessories : 1x capacitor , 2xL fittings and 1x safe valve

After-sales Service:	on Line Support and Free Spare Parts
Warranty:	Two Years
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Horizontal

Samples:	US$ 65/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air-compressor

Choosing an Air Compressor

Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.

Positive displacement

There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.

Oil-injected

Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
air-compressor

Oil-free

When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.

Single-stage

A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
air-compressor

Low-noise

A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.

China best Low Power Consumption 0.32kw Oxygen Compressor for Hospital and Home Air Pump portable air compressor
editor by CX 2023-04-18

China factory Air Compressor 860115056 /630-3509100A for Wheel Loader Lw300fn Lw500fn Zl50gv with Best Sales

Product Description

Product Specification:

AIR COMPRESSOR 860115056 /A Loader LW3A

Company Profile:

HangZhou Union Construction Machinery Co., Ltd.was founded in 2001,We are engaged in chinese brand wheel loader spare parts wholesale and export business,We have own brand spare parts ,2,000 square CZPT of warehouse can ensure enough inventory,Products are exported to Europe, the Middle East, Central Asia, South Asia and other countries.
Spare parts of each system including:Power system,Torque Converter and Transmission system,Power train, Hydraulic system,Brake system,Sheet metal system,Cab and accessorie,Conditioner system,Electrical system,Oil product, etc.
Wheel Loader Multi-function Auxiliaries : Wood grabber, pipe grabber, cotton grabber, grass grabber, sweeper, marble fork, snow shovel, snow thrower, ditch opener, etc.
In addition, we are also engaged in part of excavator accessories and engine parts.
High quality products,enough stock,19 years export experience,we can offer professional service and competitive prices for you .
ZheJiang CZPT looking CZPT to cooperation with you !

After-sales Service:	Yes
Warranty:	Yes
Type:	Air Compressor
Application:	Engine Parts
Certification:	CE, ISO9001: 2000
Condition:	New

Customization:	Available \|

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.

editor by CX 2023-04-18

China Standard High Efficiency 84kw 300cfm Diesel Screw Portable Air Compressor Hg300m-10 for Water Well Drill Rig supplier

Product Description

This series of engine adopts the six-cylinder diesel engine produced by CZPT cu mmins, and is equipped with CZPT reversing head, which greatly improves its reliability and economy. Excellent comprehensive performance, widely used in hydropower, railways, ship repair, mines, highways, shotcrete, oil and gas fields, Wells drilling, municipal construction, cable laying and other related fields.

1. Status monitoring
Operating interface according to the main and secondary separated instrument design, the interface is more concise,clear, the user is more handy for the operation.
2. European CZPT design
European CZPT design, beautiful appearance, convenient maintenance, repair.
3. Low transportation cost
Small size, light weight, low noise; It is light in shape and convenient for transportation, with less floor space, and can be moved in and out freely in narrow working conditions to reduce transportation costs.
4. Large-capacity oil tank
Equipped with large capacity oil tank, can work more than 8 hours continuously, to meet the needs of a shift.

Product Parameters

Detailed Photos

After Sales Service

1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4.Technical training for customers in our partner factory or working site.
5.Plenty of original spare parts with proven quality are all available from our central stocks.
6.All kinds of technical documents in different languages.

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: What about the voltage of products??Can they be customized?
A4: Yes, of course. The voltage can be customized according to your equirement.
Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 20-30 days.
Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.
Q7 Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

After-sales Service:	24 Hours Online Service
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Installation Type:	Movable Type

air-compressor

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with two pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China Standard High Efficiency 84kw 300cfm Diesel Screw Portable Air Compressor Hg300m-10 for Water Well Drill Rig supplier
editor by CX

Samples:	US$ 350/Piece 1 Piece(Min.Order) \| Request Sample

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

After-sales Service:	1 Year
Warranty:	1 Year
Lubrication Style:	Lubricated

Samples:	US$ 64.29/Piece 1 Piece(Min.Order) \| Order Sample

Lubrication Style:	Lubricated
Cooling System:	Air Cooling or Water Cooling
Power Source:	Diesel Engine
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Solution Description

Product Description

The center entire body between the slide and the cylinder can be made according to person needs for lengthy single chamber, quick one chamber, extended double chamber, extended and quick double chamber construction The drinking water cooling method is adopted, and all ranges are geared up with intake and exhaust buffers and separators The lubrication system adopts a lean oil station, there are 2 sets of lubrication methods, when the oil force is reduced, the auxiliary oil pump technique immediately begins running. All products is integrated on the skid-mounted foundation, with compact structure, great sealing, little starting torque, very good balance of inertia force, modest mechanical vibration, higher trustworthiness, effortless routine maintenance, extended service daily life and other attributes.

The machine is personalized according to customer need, the distinct price is dependent on the configuration demands (gas composition, exhaust volume and pressure).

Detailed Images

Item Parameters

Model	Exhaust Volume m3/min	Number of stages/Cylinders	Rotational velocity r/min	Inlet stress MPa	Exhaust Stress MPa	Equipped with energy	Drive Electricity (KW)	Dimensions mm×mm ×mm
Model	Exhaust Volume m3/min	Number of stages/Cylinders	Rotational velocity r/min	Inlet stress MPa	Exhaust Stress MPa	Equipped with energy	Drive Electricity (KW)	Dimensions mm×mm ×mm
DW-forty/eight	forty	2/two	740		.7(.8)	JSL400-8	250	3000×2600×1700
DW-80/2	80	1/2	730		.two	Y355L-eight	250	3000×1100×900
DW-1/.5-15	one	2/two	730	.05	1.5	YB200L-8	15	1870×1700×1350
DW-seventeen/1.5-4.five	seventeen	one/2	730	.15	.45	JBQ400M-twelve	160	3700×3100×1790
DW-1/.02-fifteen	one	two/2	730	.002	1.5	YB180L-8	11	1870×826×1300
DW-1/2-sixteen	1	2/2	730	.2	one.6	YB225S-B	11	2000×1700×1100
DW-1/5-20	one	two/2	730	.five	two	YB250L-8	eighteen.5	2000×1775×1300
DW-1/.02-25	one	two/2	730	.002	2.5	YB200L-eight	15	1870×1700×1050
DW-.3/20-fifty	.three	2/2	730	2	5	YB225M-8	22	1650×2400×930
DW-1.sixty five/4-22.five	one.sixty five	two/2	730	.four	2.twenty five	YA280M-eight	22	1700×2040×1200
DW-2.8/(3~5)-28	2.8	1/two	740	.3~.five	two.8	YB2-315L1-eight	90	4400×2500×2100
DW-35/1-six	35	1/2	740	.1	.6	YB355L	280	4400×2500×2100
DW-twelve.seventy eight/4-31.eight	twelve.7	two/two	485	.four	three.eighteen	YB710-12	355	7200×5500×3000
D-.08/250-five hundred	.08	1/2	1000	25	fifty	TAD620VE	135	6000×2300×2550
DWWJD-3/(~.2)-7	three	two/two	740	~.02	.7	YB250M-8	thirty	5000×2300×2400
DW-thirteen/4.7-26	thirteen	2/two	485	.forty seven	2.six	YB2-500-12	315	6200×5270×2825
DW-37/4-9	37	one/two	485	.four	.nine	YAKK-560-12	355	6200×7745×3150
D-4.2/(3~6)-250	4.2	four/4	740	.3~.six	twenty five	YB2-400L-eight	375	6000×4700×2950
D-2.4/(sixteen-23)-210	2.4	three/four	740	1.6~2.3	21	YB2-450-eight	355	5000×3500×2500
D-2.5/(12~14)-250	two.5	three/four	740	one.2~1.four	twenty five	YB2-400L-eight	250	5000×3500×2000
DF-1.twelve/17-250	1.twelve	three/three	740	one.seven	25	YB2-355M-eight	one hundred sixty	4000×3500×2900
DW-5/(.05~.1)-fifteen	five	2/2	740	.005~.01	1.five	YBP2-315S-8	55	3716×2334×1495
DF-1.4/(16~20)-250	1.4	three/four	585	1.6~2	twenty five	YB2-400M-ten	two hundred	4000×3500×2910
DF-3.5/(7~10)-250	3.five	three/7	740	.7~1	25	T12V190ZL-two	550	6600×4300×2500
D-1.7/(35-forty)-210	1.7	2	740	3.5~four	21	YB2-450-eight	355	5500×4200×1900
DF-.32/35-250	.32	two/4	740	3.five	25	YB2-315M-eight	75	2500×2500×2300
D-1.65/(twenty five~35)-210	one.sixty five	2	740	2.5~3.five	21	YB2-450M-eight	355	6500×4300×1900
D-12.5/.05-5	12.5	2/2	740	.005	.5	YB2-315M-8	seventy five	4300×2590×1700
DW-2.5/3-twelve	2.five	one/two	740	.three	1.two	YBP2-280S-8	37	4000×2300×1900
DF-2.5/(12~14)-250	two.five	3/four	740	1.2~1.4	25	YB2-450S-eight	37	5000×4300×1800
DF-2.8/(8~sixteen)-250	2.8	3/four	740	.8~1.6	25	YB2-450L-8	355	5500×4300×1800
D-1/(25~35)-250	one	2/two	740	2.5~3.five	25	YB-355L2-8	two hundred	5500×3300×1600
D-1.3/(60~85)-250	1.3	two/four	740	six~8.5	25	YB2-450M-eight	355	6500×4300×1900

Company Profile

Certifications

Following Product sales Services

one.Fast response in 2 to 8 hrs, with a reaction price exceeding 98%
two. 24-hour telephone service, you should really feel cost-free to contact us
three. The entire device is assured for 1 year (excluding pipelines and human factors)
four. Supply consulting provider for the service daily life of the whole equipment, and give 24-hour complex help via e-mail
5. On-internet site set up and commissioning by our seasoned professionals

FAQ

1) Are you manufacturing unit?
Definitely! You have touched the major sources of Cng natural fuel/Lpg/Co2/Ammoina Compressor. We are manufacturing facility.

2) Can you customise make compressor?
Sure, you want notify us some underneath info then we can give you a professional manufacture layout program offering
A. The gasoline compression medium
B. The movement fee: _____Nm3/hr
C. Inlet force: _____ Bar
D. Discharge pressure: _____ Bar
E. Inlet temperature
F. Outlet temperature (if you requiring for air cooling or h2o cooling)

3) What is your supply time?
Generally compressor with thirty-eighty five days

four) How long could your air compressor be utilized?
Generally, more than 20 a long time.

five) How lengthy is your compressor warranty?
Usually 1 year /twelve Months for total compressor equipment. And we can provide even more guarantee if required.

/ Piece
| 1 Piece

(Min. Order)

###

After-sales Service:	Whole Life After Sale Service
Warranty:	1 Year
Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement
Cylinder Position:	Horizontal

###

Customization:	Available \|

###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

/ Piece
| 1 Piece

(Min. Order)

###

After-sales Service:	Whole Life After Sale Service
Warranty:	1 Year
Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement
Cylinder Position:	Horizontal

###

Customization:	Available \|

Product Name	Truck Air Brake Compressor
Part Number	29100-2730
Truck Model	Hino Bus
Engine Model	P11C
Cylinder Bore	80MM
Brand	HCKSFS

Design No	HG550-13C
Compressor
Design	Double screw,Moveable Diesel Air Compressor
Air Shipping(m³/min)	fifteen
Rated Doing work pressure (Bar)	thirteen
Range of Operating stress(Bar)	5-thirteen
Lube Capacity(L)	80
Interface Dimension,Quantity	1-G2″, 1-G1″
L×W×H(mm)	3460×1700×2240
Fat KG	3600
Sound dB(A)	80-85
Diesel Engine
Product	Cummins 6BT5.9
Style	Cooled stroke 4 immediate injection tremendous charge
Rated Electricity(Kw/Hp)	132/176
Rated Speed(rpm)	2500
Cooling water Volume(L)	55
Lube Oil Capacity(L)	24
Gas Tank Potential(L)	380

Battery Voltage	220V	Frequency	50hz
Air delivery	200L/Min	Tank capacity	10L
No load speed	2800RPM	Energy	1 HP

Classification:	Variable Capacity
Job Classification:	Reciprocating
Transmission Power:	Internal-combustion Engine
Cooling Method:	Water-cooled
Cylinder Arrangement Mode:	Symmetrical Balance
Cylinder Stage:	Double Stages

Classification:	Variable Capacity
Job Classification:	Reciprocating
Transmission Power:	Internal-combustion Engine
Cooling Method:	Water-cooled
Cylinder Arrangement Mode:	Symmetrical Balance
Cylinder Stage:	Double Stages

After-sales Service:	Yes
Warranty:	6 Months
Type:	Engine
Certification:	ISO9001
Brake System Parts:	Brake
Color:	Black

Product Description

Product Description

Advanced Equipment–Advanced equipment guarantees product quality

Choosing the Right Air Compressor For Your Home

Positive displacement

Oil-free

Single-stage

CFM

PSI

Power source

Product Description

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

Product Description

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Product Description

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with two pistons

Product Description

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Solution Description

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

Solution Description

Choosing the Right Air Compressor For Your Home

Positive displacement

Oil-free

Single-stage

CFM

PSI

Power source

Types of Air Compressors

Air Compressors

Single-stage models

Low-noise models

Oil-free models

Solution Description

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Solution Description

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with two pistons