ZW-3/7 азот компрессоры – дәл өнеркәсіптік қолдануға арналған ықшам майсыз N2 күшейткіші

Delivering 3 m³/min at 0.70 MPa discharge pressure, the ZW-3/7 is a two-stage, two-row oil-free piston nitrogen compressor engineered for precision nitrogen boosting in small-scale cryogenic systems, laboratory gas supply, and compact VPSA installations. Ultra-compact footprint, zero oil contamination, and optimized for reliable continuous-duty operation.

Өнімге шолу

The ZW-3/7 nitrogen compressor is a precision-engineered, compact oil-free piston compressor designed for small-scale nitrogen boosting applications where space constraints, purity requirements, and operational simplicity are critical success factors. With a rated capacity of 3 m³/min және шығару қысымы 0,70 МПа, this unit serves as an ideal entry point into on-site nitrogen compression for laboratories, pilot plants, and small industrial facilities transitioning from bottled or liquid nitrogen supply.

The defining characteristic of the ZW-3/7 is its толығымен майсыз сығымдау жолы. The piston rings and rider bands are manufactured from advanced self-lubricating PTFE composite materials that operate without any hydrocarbon lubricant, guaranteeing ISO 8573-1 0 класты май құрамы in the delivered nitrogen stream. This native oil-free certification eliminates the need for downstream oil-removal filtration, activated carbon polishing beds, or continuous oil monitoring instrumentation—significantly reducing both capital expenditure and ongoing maintenance complexity for end users.

Компрессор мынаны пайдаланады екі сатылы, екі қатарлы (二列二级) architecture that divides the pressure ratio across two cylinders with an inter-stage cooler. This staged approach limits the discharge temperature of each compression stage to below 145°C, preserving the integrity of the PTFE sealing elements and extending valve plate service life. The ultra-compact dimensions—720 × 763 × 1475 мм—make the ZW-3/7 one of the smallest oil-free nitrogen compressors in its pressure class, capable of fitting through standard doorways and occupying minimal floor space in crowded machinery rooms or containerized installations.

Technical Specifications – ZW-3/7

* Барлық сипаттамалар стандартты анықтамалық шарттар бойынша бағаланған (ISO 1217, C қосымшасы). Нақты көрсеткіштер алаңның биіктігіне, қоршаған орта температурасына және кіріс жағдайларына байланысты өзгеруі мүмкін.

Негізгі ерекшеліктері және инженерлік артықшылықтары

1. Ultra-Compact Footprint for Space-Critical Installations

Уақыты 720 × 763 × 1475 мм, the ZW-3/7 occupies less than 0.55 m² of floor area and stands under 1.5 meters in height—dimensions that allow it to pass through standard doorways, fit inside elevator cars, and install in confined utility closets or under laboratory benches. The 0.80-tonne weight permits manual positioning with a pallet jack or small forklift, eliminating the need for overhead cranes or specialized rigging. This portability is particularly valuable for facilities renting space or planning future relocation, as the compressor can be moved without disassembly or heavy equipment.

2. Майсыз PTFE тығыздау жүйесі

The ZW-3/7 employs a proprietary өздігінен майланатын поршень сақинасы және шабандоздық таспа жинағы manufactured from PTFE composites reinforced with glass fiber and bronze micro-particles. These rings achieve a coefficient of friction below 0.06 without any external lubrication, ensuring the compressed nitrogen stream contains zero detectable hydrocarbon content. For analytical laboratories, pharmaceutical pilot plants, and electronics manufacturing cleanrooms, this native oil-free performance eliminates the capital cost of downstream oil-filtration skids, activated carbon adsorbers, and continuous oil-monitoring sensors that would otherwise be mandatory with lubricated compressor alternatives.

3. Two-Stage Compression with Compact Intercooling

The two-stage, two-row architecture distributes the overall pressure ratio between a low-pressure cylinder and a high-pressure cylinder, with a compact plate-and-frame intercooler removing the heat of compression between stages. This staged approach limits the discharge temperature of each cylinder to below 145°C, preventing thermal degradation of the PTFE sealing elements and extending valve plate service life by approximately 25% compared to single-stage compressors operating at equivalent pressure ratios. The 0.70 MPa discharge pressure is well-suited for medium-pressure nitrogen distribution in small facilities, providing sufficient head for pipeline runs up to 500 meters and for feeding nitrogen to multiple point-of-use stations.

4. Low-Power 380V Direct Drive

The ZW-3/7 is driven by a 22 kW, 380V, 50Hz three-phase induction motor rated to IEC 60034-1 IE3 efficiency class. The modest power requirement allows the unit to operate from standard 380V distribution panels found in virtually all industrial and commercial buildings, without requiring dedicated electrical rooms, medium-voltage switchgear, or power-factor correction equipment. The low inrush current at startup (approximately 5× full-load current) is compatible with standard motor starters and soft-start devices, further simplifying electrical integration.

Қолдану сценарийлері

Small-Scale Cryogenic Air Separation & Liquid Nitrogen Vaporization

In compact cryogenic ASU installations producing 100–300 Nm³/h of gaseous nitrogen, the ZW-3/7 functions as the primary nitrogen booster between the cold box and the facility distribution header. Its 3 m³/min capacity aligns precisely with the output of small-scale ASUs, while the 0.70 MPa discharge pressure provides adequate head for distribution to process equipment, laboratory fume hoods, and storage vessel blanketing systems. The oil-free design is essential in these installations because small ASUs typically lack the extensive post-processing purification trains of large facilities, making any oil contamination immediately detrimental to product quality.

Compact VPSA Nitrogen Booster Systems

For small VPSA nitrogen generators producing 99.5–99.9% purity nitrogen at near-atmospheric pressure (0.05–0.10 MPa), the ZW-3/7 nitrogen booster compresses the low-pressure product to 0.70 MPa for distribution to point-of-use applications. The diminutive footprint of the ZW-3/7 allows it to be mounted on the same skid as the VPSA generator, creating a fully integrated nitrogen supply system that occupies less than 5 m² of floor space. The oil-free compression path is critical because any hydrocarbon contamination would permanently poison the carbon molecular sieve adsorbent, degrading the generator’s separation efficiency and necessitating costly adsorbent replacement.

Analytical Laboratory & Research Facility Gas Supply

Research laboratories, university chemistry departments, and analytical service centers require a continuous supply of high-purity nitrogen for gas chromatography (GC), liquid chromatography-mass spectrometry (LC-MS), inductively coupled plasma (ICP) instruments, and inert atmosphere glove boxes. The ZW-3/7’s oil-free certification ensures that the nitrogen stream meets the stringent purity requirements of analytical instruments without requiring additional purification cartridges or oil-monitoring systems. The 3 m³/min capacity can support multiple GC-MS systems, ICP-MS instruments, and glove boxes operating simultaneously within a single laboratory suite.

Electronics Assembly & Precision Soldering Inerting

In electronics manufacturing facilities, nitrogen is essential for wave soldering inerting, selective soldering atmosphere control, reflow oven nitrogen purge, and component storage dry cabinets. The ZW-3/7’s 0.70 MPa discharge pressure is sufficient for feeding nitrogen distribution manifolds serving multiple soldering stations and storage cabinets. The oil-free design is non-negotiable in electronics applications because even trace oil contamination can cause solder joint defects, conformal coating adhesion failures, and optical component contamination that results in product rejection and warranty claims.

Материал және құрылыс

The ZW-3/7 is constructed from materials rigorously selected for nitrogen compatibility, corrosion resistance, and compact structural integrity:

Барлық қысым көтеретін компоненттер сәйкес жобаланған және жасалған ASME BPVC VIII бөлім 1-бөлім or Chinese GB 150 standards. Weld joints undergo 100% radiographic inspection (RT), and each pressure vessel is subjected to hydrostatic testing at 1.5× the maximum allowable working pressure (MAWP) for a minimum 30-minute hold period prior to shipment.

Орнату және техникалық қызмет көрсету нұсқаулары

Іргетас және кеңістіктік талаптар

The ZW-3/7 weighs only 0.80 tonnes and features a low center of gravity due to its compact vertical design. A 1,5-2,0 тонналық темірбетон төсем is sufficient for stable operation, mounted on elastomeric vibration isolators (natural frequency 10–15 Hz). The two-row opposed-cylinder arrangement inherently cancels first-order inertial forces, minimizing vibration transmission to adjacent structures and sensitive equipment. Required clearances: 0.8 m on the non-drive side for valve access, 0.6 m on the drive side for motor maintenance, and 1.2 m overhead for crane access during major overhauls.

Салқындатқыш судың сипаттамалары

Салқындатқыш суға қажеттілік шамамен 5 m³/h at an inlet temperature not exceeding 32°C. The water distribution circuit feeds the cylinder jackets and intercooler in parallel. Acceptable water quality: pH 6.5–8.5, total hardness < 300 mg/L as CaCO₃, chloride < 50 mg/L, suspended solids < 30 mg/L. For installations without reliable municipal water supply, a compact closed-loop cooling tower with a 0.5 m³ buffer tank is recommended. Alternatively, an air-cooled aftercooler option is available for sites where cooling water is unavailable or prohibitively expensive.

Алдын алу жұмыстарының кестесі

The oil-free architecture of the ZW-3/7 dramatically reduces maintenance complexity compared to lubricated alternatives. There are no oil changes to schedule, no oil samples to send for laboratory analysis, no filter elements to stock and replace, and no oil separator cartridges to monitor. The only recurring wear items are the PTFE поршень сақиналары және рульдік белдіктер, which typically achieve 4,000–6,000 hours of service life under clean nitrogen conditions. This simplified maintenance profile is particularly advantageous for facilities without dedicated compressor maintenance personnel.

Сәйкестік және қауіпсіздік сертификаттары

The ZW-3/7 nitrogen compressor is designed, manufactured, and tested to meet the following international standards and regulatory frameworks:

Өнімділік және тиімділік талдауы

The ZW-3/7 achieves a specific power consumption of approximately 7.33 kW per m³/min of nitrogen at 0.70 MPa discharge pressure. While this specific power is higher than larger models due to reduced scale efficiency, it remains competitive within the sub-5 m³/min oil-free piston compressor segment. For comparison, oil-lubricated screw compressors in this size range typically consume 7.8–8.5 kW/m³/min, and diaphragm compressors (often selected for oil-free applications) can exceed 11 kW/m³/min.

Over an 8,000-hour annual operating cycle, the ZW-3/7’s efficiency advantage versus less efficient alternatives yields approximately 12,000–28,000 kWh of energy savings per year. At $0.08/kWh, this represents $960–$2,240 in annual electricity cost reduction. However, the primary economic justification for ZW-3/7 selection is typically the elimination of oil-related consumables and downstream purification equipment шекті энергия үнемдеуден гөрі.

The азот сығымдауына меншік құқығының жалпы құны in small-scale applications is dominated by maintenance labor, consumables, and logistical costs rather than energy. The ZW-3/7’s oil-free design eliminates oil changes ($300–600/year), filter replacements ($150–300/year), separator cartridge changes ($400–800/year), and oil analysis ($100–200/year), delivering total consumable savings of $950–$1,900 annually compared to lubricated alternatives. Additionally, the elimination of downstream oil-filtration equipment saves $3,000–$8,000 in initial capital expenditure.

Теңшеу және OEM мүмкіндіктері

We provide flexible customization options to adapt the ZW-3/7 to specific installation constraints, integration requirements, and end-user specifications:

• Сырғанаққа бекітілген пакеттер: Pre-assembled compressor, motor, cooler, and control panel on a structural steel skid with forklift pockets and lifting eyes. Reduces field installation to electrical connection and cooling water hookup only—typically completed within one working day.
• Mobile Cart & Container Units: The ZW-3/7 can be mounted on a wheeled cart for laboratory mobility or integrated into a 20-foot shipping container with integrated power, cooling, and nitrogen distribution, creating a fully portable nitrogen supply station for field operations, construction sites, and emergency response.
• PLC және қашықтан бақылау: Optional Siemens LOGO! or S7-1200 PLC with 7-inch HMI touchscreen, Ethernet connectivity, and SMS/email alarm notifications. Compatible with Modbus TCP/IP for SCADA integration and remote diagnostics.
• Акустикалық корпустар: Compact IP54-rated sound enclosure reducing noise from 80 dB(A) to 65 dB(A) at 1 meter, suitable for indoor installations in noise-sensitive environments such as laboratories, cleanrooms, and office-adjacent utility rooms.
• OEM және жеке жапсырма: Custom paint schemes, branded nameplates, and localized documentation packages for gas equipment distributors and system integrators. Technical manuals can be supplied in English, Chinese, Spanish, or other languages upon request.

Арнайы конфигурациялар мына жерден қолжетімді MOQ 1 бірлік. Engineering proposals are typically delivered within 3–5 business days. Standard delivery time is 8–10 weeks; expedited delivery within 6 weeks is available for qualifying orders.

Case Study: University Chemistry Department Nitrogen Supply Modernization

Клиент: A leading university chemistry department in Thailand

Қиындық: The department was purchasing high-pressure nitrogen cylinders (200 bar, 50-liter) at a rate of 40–50 cylinders per month to supply gas chromatography, mass spectrometry, and inert atmosphere glove boxes across three laboratory buildings. Cylinder handling was labor-intensive, delivery scheduling was unreliable during university holidays, and the per-unit cost of cylinder nitrogen was approximately 15× the cost of on-site generated nitrogen. Additionally, cylinder changeovers frequently interrupted critical experiments.

Шешімі: Біз қамтамасыз еттік ZW-3/7 oil-free nitrogen compressor paired with a compact PSA nitrogen generator (99.9% purity, 4 m³/min) on a common skid. The ZW-3/7 boosts the PSA product from 0.06 MPa to 0.70 MPa for distribution through the existing laboratory nitrogen piping network. The entire system occupies 4 m² in a ground-floor utility room and was installed without building modifications.

Results After 24 Months:

• Азотпен жабдықтау құны: 68%-ге азайтылды versus cylinder purchase and delivery
• Labor burden: Eliminated cylinder handling (previously 8–10 hours/week of technician time)
• Жеткізудің сенімділігі: 100% uptime since commissioning, zero experiment interruptions due to gas shortage
• Nitrogen purity: Consistently >99.9% with oil content <0.01 mg/m³, exceeding all analytical instrument requirements
• Maintenance: One scheduled service per year (4,000-hour interval), versus weekly cylinder changeovers
• Өтемақы төлеу мерзімі: 1,8 жыл based on gas cost and labor savings

“The ZW-3/7 compressor has completely transformed our nitrogen logistics. Our technicians no longer spend hours moving heavy cylinders, our researchers never run out of gas mid-experiment, and the department’s operating budget has been reduced by nearly $25,000 per year.” — Department Head, Chemistry Faculty

Жиі қойылатын сұрақтар және таңдау бойынша нұсқаулық

Байланысты өнімдер мен шешімдер

Біздің толық шолуымыз үшін өнеркәсіптік азот компрессоры майсыз оттегі компрессорларын, сутегі компрессорларын, көмірқышқыл газы компрессорларын және арнайы жасалған арнайы газ шешімдерін қоса алғанда, портфолио үшін біздің қолданбалы инженерлік тобымызбен хабарласыңыз немесе онлайн өнім каталогымызды қараңыз.

Ready to Modernize Your Nitrogen Supply?

Our application engineers are available to evaluate your nitrogen flow requirements, inlet conditions, discharge pressure targets, and spatial constraints. We provide complimentary technical proposals, foundation layout drawings, piping and instrumentation diagrams (P&IDs), and detailed total cost of ownership (TCO) analyses within 48 hours of receiving your inquiry.

Электрондық пошта: [email protected] | 24 сағат ішінде жауап беру