China factory 7.5kw/10HP All in One Industrial Combined Screw Air Compressor with Tank 300L and Line Filters Three in One Rotary Air Compressor at-10ad-Tank wholesaler

Product Description

Product Description:

The screw air compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor.
There are 2 types of single-screw and twin-screw. Generally speaking, the CZPT refers to the twin-screw compressor. It was first proposed by the German H. Krigar in 1878. It was not until 1934 by A. Lysholm of the Royal Institute of Technology in Sweden that the technology was established, and it began to be applied in industry and achieved rapid development.

Product Photo:

Product Specification:

Model AT-5AD-TANK AT-7.5AD-TANK AT-10AD-TANK AT-15AD-TANK AT-20AD-TANK AT-25AD-TANK AT-30AD-TANK
Air Delivery (m3/min)/ Pressur(Mpa) 0.4/0.8 0.76/0.8 1.0/0.8 1.7/0.8 2.2/0.8 3/0.8 3.6/0.8
0.4/1.0 0.6/1.0 0.9/1.0 1.5/1.0 1.5/1.0 2.3/1.0 3/1.0
Cooling Method Air Cooling Air Cooling Air Cooling Air Cooling
Lubrication Volume(L) 5 5 8 10 15 18 18
Driving Mode Belt-Driven Direct-Driven
Voltage 120-440V;50/60Hz 120-440V;50/60Hz  
Power(KW/HP) 3.7/5 5.5/7.5 7.5/10 11/15 15/20 18.5/25 22/30
Start System Start-UP Start-UP Start-UP Y-△ Y-△ Y-△ Y-△
Size(cm) 165*63*155 165*63*155 165*63*155 185*75*175 185*75*175 185*85*190 185*85*190
Tank Volume 300L 300L 300L 350L 350L 500L 500L
Weight 250 260 270 280 430 550 580
Outlet size G1/2″ G1/2″ G1/2″ G3/4″ G3/4″ G1″ G1″

 Product Parameters:

Product Details:

New generation of high-efficient Airend
1.Advanced and energy saving spiral tooth-type technology.
2.New Type 5:6 asymmetrical rotator tooth type.
3.Power increased by more than 5%-10% in air dischage when compared to other ordinary machine.

High -efficient power system
1.The motor is energy saving and efficient, the bearing is used SKF.
2. The protection class of motor up to IP55 and insulation of F level, the efficiency can be increased for abut 5%.
3.The motor is low noise,low in vibratio and smooth in operation.

Coupling Transmission
1.Motor aligns the rigid coupling of the host automatically, and adopts imported elastic coupling, damping vibrates at impact,to ensure that the transmission is totally effective,without energy loss.
2.Direct link design,screw host engine and motor have low center of gravity,reduce the noise source and vibration source,and enhance the stability of the unit.

High Efficient oil and gas speraration system
with the world famous brand apoda oil and gas sperarator, reduce the oil content of the compressor exhaust gas and the oil content of the unit power consumption is only 1-2PPM.

Intelligent control system
1.Multi-Language can be switched according to your requirement.
2.With protection functions up to 12 types, such as overload,short circuit,low temperature, over voltage and so on.
3.Simply and clear, easy to operate.

Product Application:
Workshop Display:

Our Advantages:

Factory Overview:

Global Market:

FAQ:

1.Q:Can you provide the samples to us?
    A: yes, we can provide the sample to you in free, but the cost of the freight on your account.

2. Q:Can you do the order according to the customer requirement?
     A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.

3. Q:What is your delivery time?
    A:Normally, it’s 7 days if the goods are in stock. It will  takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.

4.Q:What is your terms of payment?
    A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.

5. Q: How long is the warranty ?
     A: 14 months since the container shipped except quick-wear parts.
 

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type
Samples:
US$ 2500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air-compressor

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which one is right for your needs and what makes one better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which one you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in one stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use one of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use two stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, one piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the two pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These two features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated one include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China factory 7.5kw/10HP All in One Industrial Combined Screw Air Compressor with Tank 300L and Line Filters Three in One Rotary Air Compressor at-10ad-Tank   wholesaler China factory 7.5kw/10HP All in One Industrial Combined Screw Air Compressor with Tank 300L and Line Filters Three in One Rotary Air Compressor at-10ad-Tank   wholesaler
editor by CX 2023-05-30