Descrizione
ZW-5.3/16 Nitrogen Compressor – High-Pressure Oil-Free N2 Booster for 1.60 MPa Industrial Applications
Engineered to deliver 5.3 m³/min at 1.60 MPa discharge pressure, the ZW-5.3/16 is a two-stage, three-row oil-free piston nitrogen compressor purpose-built for high-pressure nitrogen injection, cylinder filling, and demanding petrochemical process applications. Zero oil contamination, compact footprint, and optimized for continuous-duty operation at elevated pressure.
Panoramica del prodotto
IL ZW-5.3/16 nitrogen compressor represents a specialized high-pressure solution within our oil-free piston compressor family, engineered for applications where elevated discharge pressure is the primary operational requirement. With a rated capacity of 5.3 m³/min e un eccezionale 1.60 MPa discharge pressure, this unit occupies a unique position in the industrial nitrogen compression landscape—bridging the gap between conventional low-pressure boosters and ultra-high-pressure gas filling systems.
What distinguishes the ZW-5.3/16 from conventional alternatives is its meccanismo di compressione completamente senza olio utilizing self-lubricating PTFE composite piston rings and rider bands. This design philosophy eliminates any possibility of hydrocarbon contamination in the nitrogen product stream, making the unit immediately suitable for high-purity nitrogen cylinder filling, pharmaceutical-grade nitrogen injection, and electronics process gas supply without additional downstream purification equipment. The oil-free certification is particularly critical at 1.60 MPa because oil contamination at elevated pressure becomes more difficult and costly to remove.
Its two-stage, three-row (二列三级) configuration delivers the high pressure ratio required for 1.60 MPa discharge while managing thermal loads through staged intercooling. The compact dimensions—1947 × 1900 × 2580 mm—allow the ZW-5.3/16 to fit into existing machinery rooms or containerized installations where floor space is at a premium. At 3.97 tonnes, the unit can be transported and positioned using standard forklift equipment.
Technical Specifications – ZW-5.3/16
| Parametro | Valore | Unità |
|---|---|---|
| Modello | ZW-5.3/16 | – |
| Modello | Two-stage, Three-row (二列三级) | – |
| Capacità | 5.3 | m³/min |
| Pressione di scarico | 1.60 | MPa |
| Dimensioni del compressore (L × P × A) | 1947 × 1900 × 2580 | mm |
| Peso | 3.97 | T |
| Energia | 55 | kW |
| Voltaggio | 380 | V |
| Gas medio | Azoto (N₂) | – |
| Lubrificazione | Senza olio | – |
* Tutte le specifiche sono valutate in condizioni di riferimento standard (ISO 1217, Allegato C). Le prestazioni effettive possono variare in base all'altitudine del sito, alla temperatura ambiente e alle condizioni di ingresso.
Caratteristiche principali e vantaggi ingegneristici
1. Tecnologia di tenuta in PTFE ad alta pressione senza olio
The ZW-5.3/16 employs a proprietary self-lubricating piston ring and rider band system manufactured from high-performance PTFE composites reinforced with glass fiber and bronze particulates, specifically formulated for high-pressure service. This material achieves a coefficient of friction below 0.08 without any external hydrocarbon lubrication, completely eliminating oil vapor carryover into the nitrogen stream. At 1.60 MPa, the risk of oil contamination becomes exponentially more problematic because oil droplets are more difficult to separate at elevated pressure, and any contamination becomes concentrated in the compressed gas. The ZW-5.3/16’s native oil-free design achieves ISO 8573-1 Class 0 compliance without downstream filtration, a critical advantage for cylinder filling and high-purity process applications.
2. Two-Stage Three-Row Compression Architecture
IL two-stage, three-row configuration of the ZW-5.3/16 is uniquely engineered to achieve the high pressure ratio required for 1.60 MPa discharge. The three-row arrangement provides superior force balance compared to two-row designs, reducing vibration transmission and permitting installation on lighter foundations. The staged compression with inter-stage cooling limits the discharge temperature of each stage to below 160°C, preserving the integrity of the PTFE sealing elements and extending valve plate life. This thermal management is particularly critical at high pressure ratios where adiabatic compression temperatures would otherwise exceed the safe operating limits of polymer-based seals.
3. Compact Design for Space-Constrained Installations
At 1947 × 1900 × 2580 mm, the ZW-5.3/16 occupies remarkably little floor space for a high-pressure compressor of this capability. The compact footprint is achieved through an optimized vertical crankcase design that minimizes the machine’s longitudinal dimension while maintaining adequate maintenance access. The 3.97-tonne weight permits transportation and positioning using standard forklift equipment, eliminating the need for overhead cranes or specialized rigging. This portability makes the ZW-5.3/16 ideal for containerized nitrogen supply systems, mobile cylinder filling stations, and retrofit installations in existing compressor houses with limited floor space.
4. Standard 380V Direct-On-Line Motor Drive
The ZW-5.3/16 is powered by a 55 kW, 380V, 50Hz three-phase induction motor rated to IEC 60034-1 IE3 efficiency class. The standard low-voltage configuration integrates directly into existing 380V industrial distribution panels without requiring medium-voltage infrastructure, step-down transformers, or specialized switchgear. This electrical simplicity reduces both capital expenditure and commissioning complexity, making the ZW-5.3/16 an attractive option for facilities upgrading from bottled nitrogen or membrane generators to on-site high-pressure compression.
Scenari applicativi
High-Pressure Nitrogen Cylinder Filling
The ZW-5.3/16 is purpose-built for nitrogen cylinder filling stations serving industrial gas distributors, welding supply companies, and specialty gas laboratories. Its 1.60 MPa discharge pressure is sufficient to fill standard industrial nitrogen cylinders to 15 MPa working pressure through a high-pressure booster or cascade system. The 5.3 m³/min capacity supports a filling rate of approximately 20–25 cylinders per hour (40L, 15 MPa), making it suitable for medium-volume filling operations. The oil-free design is mandatory for cylinder filling because any oil contamination would be concentrated in the compressed gas and could contaminate downstream processes when the cylinder is used.
Petrochemical High-Pressure Nitrogen Injection
In petrochemical and refinery operations, the ZW-5.3/16 provides high-pressure nitrogen for reactor inerting, catalyst preservation, emergency vessel purging, and pipeline pressure testing. The 1.60 MPa discharge pressure is sufficient to overcome the pressure ratings of most process vessels and reactor systems, allowing direct nitrogen injection without intermediate boosting. The ZW-5.3/16 high-pressure nitrogen compressor is particularly valuable for emergency response scenarios where rapid nitrogen injection is required to inert a vessel or suppress a runaway reaction. The oil-free certification is mandatory because nitrogen at 1.60 MPa entering a catalyst bed or process stream must remain completely hydrocarbon-free.
Pharmaceutical & Biotechnology Process Gas
Pharmaceutical manufacturing facilities require high-purity nitrogen for sterile process inerting, lyophilization (freeze-drying), and aseptic filling operations. The ZW-5.3/16’s oil-free certification ensures compliance with FDA 21 CFR, EU GMP Annex 1, and pharmacopeial nitrogen standards. The 1.60 MPa pressure is adequate for feeding high-pressure nitrogen distribution manifolds serving multiple sterile processing suites, autoclaves, and freeze-dryers. The compact footprint allows installation within pharmaceutical cleanroom support areas or utility corridors where space is severely constrained.
Electronics & Semiconductor Manufacturing
Semiconductor fabrication facilities require high-pressure nitrogen for wafer handling systems, chemical vapor deposition (CVD) processes, and ion implantation chamber purging. The ZW-5.3/16’s 1.60 MPa discharge pressure is sufficient for feeding the high-pressure nitrogen headers that serve process tools requiring elevated pressure for pneumatic actuation or process gas delivery. The oil-free design is absolutely non-negotiable in semiconductor applications because even trace oil contamination can cause catastrophic defects in integrated circuits, leading to yield losses measured in millions of dollars.
Materiali e costruzione
The ZW-5.3/16 is constructed from premium materials selected for high-pressure nitrogen compatibility, corrosion resistance, and extended operational life:
| Componente | Materiale | Specifiche |
|---|---|---|
| Cylinder Block | Ghisa grigia | GG25 / HT250, integral cooling passages |
| Albero motore | acciaio legato forgiato | 42CrMo4, Q&T, dynamically balanced |
| Fasce elastiche del pistone | Composito PTFE-vetro-bronzo | Self-lubricating, high-pressure rated to 2.0 MPa |
| Fasce dei cavalieri | Composito in PTFE | Piston guidance, anti-scuffing, wear rate <0.05 mm/1000h |
| Piastre delle valvole | acciaio inossidabile | Acciaio inossidabile SS316, design ad anelli concentrici ad alta pressione |
| Connecting Rods | Forged Steel with Babbitt Bearings | Precision-machined, oil-lubricated big end |
| Intercooler | Guscio in acciaio al carbonio / Tubi in acciaio inox SS316 | ASME VIII Div.1, 1.5× hydrotest |
| Postrefrigeratore | Guscio in acciaio al carbonio / Tubi in acciaio inox SS316 | Tubo alettato ad alta pressione, acqua di raffreddamento a 32 °C |
| Tubazioni ad alta pressione | acciaio inossidabile senza saldatura | SS316, rated to 2.5 MPa working pressure |
All pressure-bearing components are designed and fabricated in accordance with ASME BPVC Sezione VIII Divisione 1 or Chinese GB 150 standards. Every weld joint undergoes 100% radiographic inspection (RT) per ASME Section V, Article 2, and each completed pressure vessel is subjected to a hydrostatic pressure test at 1.5 times the maximum allowable working pressure (MAWP) for a minimum hold period of 30 minutes.
Linee guida per l'installazione e la manutenzione
Foundation & Spatial Requirements
The ZW-5.3/16 weighs 3.97 tonnes and features a compact vertical design with a low center of gravity. A reinforced concrete pad of 5–6 tonnes is sufficient for stable operation, mounted on elastomeric vibration isolators (natural frequency 8–12 Hz). The three-row opposed-cylinder arrangement provides excellent force balance, minimizing vibration transmission. Required clearances: 1.0 m on the non-drive side for valve maintenance, 0.8 m on the drive side for motor access, and 1.5 m overhead for routine service.
Cooling Water Specifications
La richiesta di acqua di raffreddamento è approssimativamente 15 m³/h at an inlet temperature not exceeding 32°C. The water distribution circuit feeds the cylinder jackets and intercooler in parallel. Water quality specifications: pH 6.5–8.5, total hardness < 300 mg/L as CaCO₃, chloride content < 50 mg/L (to prevent SS316 tube corrosion), suspended solids < 30 mg/L. For installations without reliable municipal water, a compact closed-loop cooling tower with a 0.5 m³ buffer tank is recommended.
Programma di manutenzione preventiva
| Intervallo | Articolo di servizio | Azione richiesta |
|---|---|---|
| Quotidiano | Visual & Operational Check | Inspect for leaks, abnormal noise, cooling water flow, discharge temperature |
| 250 ore | Ispezione della piastra delle valvole | Check for carbon deposits, spring fatigue, or cracking in high-pressure valves |
| 1.000 ore | Valutazione dell'usura delle fasce elastiche del pistone | Measure groove clearance; replace rings if clearance exceeds 0.20 mm |
| 3.000 ore | Revisione intermedia | Sostituire tutte le fasce elastiche del pistone, le fasce di scorrimento e i gruppi della piastra delle valvole. |
| 6.000 ore | Revisione completa | Inspect crankshaft, measure bearing clearances, replace bearings if >0.08 mm |
The oil-free design of the ZW-5.3/16 dramatically simplifies maintenance compared to lubricated alternatives. There are no oil changes, no oil analysis, no filter replacements, and no separator cartridge changes. The only consumable wear items are the Fasce elastiche e anelli di scorrimento in PTFE, which typically achieve 3,000–5,000 hours of service under clean nitrogen conditions at high pressure.
Certificazioni di conformità e sicurezza
The ZW-5.3/16 nitrogen compressor meets the following international standards and regulatory requirements:
ASME BPVC Sezione VIII Div.1, GB 150-2011, PED 2014/68/UE Modulo A
IEC 60034-1 (IE3 efficiency), IEC 60204-1, ISO 12100
ISO 8573-1 Class 0 (Oil Content), TÜV Rheinland tested
ISO 9001:2015, ISO 14001:2015
Nitrogen is an odorless, colorless asphyxiant gas. At 1.60 MPa, nitrogen releases from the ZW-5.3/16 can create high-velocity jets that rapidly displace oxygen in enclosed spaces. All installations must include continuous oxygen deficiency monitoring, emergency ventilation systems, and personnel training on nitrogen hazard awareness. Emergency shutdown interlocks should activate at 19.5% O₂ (alarm) and trigger hard shutdown at 18.0% O₂.
Analisi delle prestazioni e dell'efficienza
The ZW-5.3/16 achieves a specific power consumption of approximately 10.38 kW per m³/min of nitrogen at 1.60 MPa discharge pressure. While this specific power is higher than low-pressure models due to the elevated pressure ratio, it remains competitive within the high-pressure oil-free piston compressor segment. For comparison, oil-lubricated reciprocating compressors at equivalent pressure ratios typically consume 11–13 kW/m³/min, and diaphragm compressors (often selected for high-pressure oil-free service) may exceed 15 kW/m³/min.
The primary economic advantage of the ZW-5.3/16 is not marginal energy savings but the elimination of oil-related consumables and downstream purification equipment. A typical oil-lubricated high-pressure compressor requires quarterly oil changes ($300–600/year), monthly oil analysis ($200–400/year), annual filter replacements ($500–1,000/year), and separator cartridge changes ($800–1,500/year). The ZW-5.3/16 eliminates all of these expenses, delivering total consumable savings of $1,800–$3,500 annually.
Additionally, the costo totale di proprietà per la compressione di azoto ad alta pressione is further reduced by eliminating the need for downstream oil-removal equipment. At 1.60 MPa, oil-filtration systems become significantly more complex and expensive, often requiring multi-stage coalescing filters followed by activated carbon adsorbers. The ZW-5.3/16’s native oil-free design removes this capital and operating burden entirely.
Capacità di personalizzazione e produzione OEM
We provide flexible customization options to adapt the ZW-5.3/16 to specific installation constraints and end-user requirements:
- Skid-Mounted Packages: Pre-assembled compressor, motor, coolers, and control panel on a structural steel skid with forklift pockets and lifting eyes. Reduces field installation to electrical and cooling water connections only.
- Mobile Cylinder Filling Stations: The ZW-5.3/16 can be mounted on a road-legal trailer with integrated nitrogen storage, cylinder filling manifold, and diesel generator, creating a fully mobile high-pressure nitrogen supply unit for construction sites and emergency response.
- PLC & Remote Monitoring: Optional Siemens LOGO! or S7-1200 PLC with HMI touchscreen, Ethernet connectivity, and SMS/email alarm notifications. Compatible with Modbus TCP/IP for SCADA integration.
- Acoustic Enclosures: Compact IP54-rated sound enclosure reducing noise from 84 dB(A) to 68 dB(A) at 1 meter, suitable for indoor installations in noise-sensitive environments.
- OEM e Private Label: Custom paint schemes, branded nameplates, and localized documentation for gas equipment distributors and system integrators.
Le configurazioni personalizzate sono disponibili da Quantità minima d'ordine: 1 unità. Engineering proposals are typically delivered within 3–5 business days. Standard delivery is 10–12 weeks; expedited delivery within 8 weeks is available.
Case Study: Nitrogen Cylinder Filling Station Upgrade
Cliente: An industrial gas distributor in Thailand serving welding, food packaging, and pharmaceutical customers
Sfida: The client’s existing oil-lubricated compressor (12 years in service) was experiencing oil carryover into filled nitrogen cylinders, causing customer complaints from pharmaceutical clients and requiring expensive cylinder cleaning procedures. The compressor was also undersized for growing demand, creating bottlenecks during peak filling periods.
Soluzione: We supplied a ZW-5.3/16 oil-free nitrogen compressor configured on a custom skid with integrated intercooler, aftercooler, and a high-pressure filling manifold capable of filling 40L cylinders to 15 MPa. The compact skid footprint fit within the existing filling bay without structural modifications.
Results After 18 Months:
- Cylinder oil contamination: Eliminato completamente, achieving ISO 8573-1 Class 0 in all filled cylinders
- Reclami dei clienti: Zero related to oil contamination or cylinder quality
- Filling capacity: Increased by 35%, reducing peak-period bottlenecks
- Maintenance costs: Reduced by 40% through elimination of oil-related repairs and filter changes
- Cylinder cleaning expenses: Eliminated, saving $8,000/year
“The ZW-5.3/16 has completely transformed our cylinder filling operation. No more oil contamination issues, no more customer complaints, and our maintenance team spends half the time on compressor service. The payback was under 2 years.” — Operations Manager, Industrial Gas Distributor
Domande frequenti e guida alla selezione
Prodotti e tecnologie correlati
ZW Series Multi-Stage High-Pressure Compressors
Vertical, multi-stage oil-free compressors for oxygen, nitrogen, hydrogen, and specialty gases. Discharge pressures up to 9.00 MPa for cylinder filling, gas injection, and chemical process applications.
Compressori di azoto ad alta pressione serie DW
Medium to high-pressure oil-free compressors (0.40–2.00 MPa) for nitrogen injection, pipeline boosting, and chemical synthesis. Capacities from 2 to 130 m³/min.
MW Series Medium-Pressure Compressors
Medium-pressure oil-free compressors (1.0–4.0 MPa) for nitrogen recycle, gas liquefaction, and process gas compression in petrochemical operations.
For a complete overview of our compressore industriale di azoto portfolio, including oil-free oxygen compressors, hydrogen compressors, and specialty gas solutions, please contact our engineering team.
Pronti ad aggiornare il vostro sistema di azoto ad alta pressione?
Our application engineers are available to evaluate your high-pressure nitrogen requirements, inlet conditions, and integration constraints. We provide complimentary technical proposals, layout drawings, and TCO analyses within 48 hours.
E-mail: [email protected] Risposta entro 24 ore
